Specific Heat and Thermal Conductivity MCQ Practice

Question 1 of 10

Use the table. An aluminum block of mass $0.50\,\mathrm{kg}$ is heated from $20^\circ\mathrm{C}$ to $80^\circ\mathrm{C}$. How much thermal energy must be transferred to the block?

Material $c$ (J/(kg$\cdot$K)) $k$ (W/(m$\cdot$K))
Aluminum 900 205
Copper 390 400
Iron 450 80
Brass 380 110
Glass 840 1.0
Water 4180 —
Wood 1700 0.12
  1. A. $2.7\times 10^{3}\,\mathrm{J}$
  2. B. $1.8\times 10^{4}\,\mathrm{J}$
  3. C. $2.7\times 10^{4}\,\mathrm{J}$
  4. D. $4.5\times 10^{4}\,\mathrm{J}$

Question 2 of 10

A $0.20\,\mathrm{kg}$ copper sample at $100^\circ\mathrm{C}$ is placed in $0.50\,\mathrm{kg}$ of water at $20^\circ\mathrm{C}$ in an insulated calorimeter. Use $c_{\mathrm{Cu}}=390\,\mathrm{J/(kg\cdot K)}$ and $c_{\mathrm{w}}=4180\,\mathrm{J/(kg\cdot K)}$. Assuming no energy leaves the calorimeter, which value is closest to the equilibrium temperature?

  1. A. $20^\circ\mathrm{C}$
  2. B. $23^\circ\mathrm{C}$
  3. C. $40^\circ\mathrm{C}$
  4. D. $60^\circ\mathrm{C}$

Question 3 of 10

Two copper samples have the same temperature. Sample 2 has twice the mass of sample 1. Which statement is correct?

  1. A. Sample 2 has twice the specific heat of sample 1.
  2. B. Sample 1 has twice the specific heat of sample 2.
  3. C. The samples have different specific heats because mass is an extrinsic property.
  4. D. The samples have the same specific heat; sample 2 requires twice as much energy for the same $\Delta T$.

Question 4 of 10

Two insulated samples absorb the same quantity of thermal energy. Sample X has mass $m$ and specific heat $c$. Sample Y has mass $2m$ and specific heat $c/2$. How does $\Delta T_Y$ compare with $\Delta T_X$?

  1. A. $\Delta T_Y=\Delta T_X$
  2. B. $\Delta T_Y=2\Delta T_X$
  3. C. $\Delta T_Y=\tfrac12\Delta T_X$
  4. D. $\Delta T_Y=4\Delta T_X$

Question 5 of 10

Two samples of equal mass are heated by identical constant power heaters starting at $20^\circ\mathrm{C}$. The graph shows temperature versus time. Which claim is best supported?

Temperature versus time for samples P and Q heated at the same constant power.
  1. A. Sample P has the larger specific heat.
  2. B. Sample Q has the smaller heat capacity $mc$.
  3. C. Sample Q has the larger specific heat.
  4. D. The samples must have the same specific heat because the power is the same.

Question 6 of 10

A copper slab has thermal conductivity $k=400\,\mathrm{W/(m\cdot K)}$, cross-sectional area $A=0.010\,\mathrm{m}^{2}$, and thickness $L=0.50\,\mathrm{m}$. The faces are held at $60^\circ\mathrm{C}$ and $20^\circ\mathrm{C}$. What is the rate of conductive heat transfer through the slab?

  1. A. $32\,\mathrm{W}$
  2. B. $320\,\mathrm{W}$
  3. C. $800\,\mathrm{W}$
  4. D. $3200\,\mathrm{W}$

Question 7 of 10

In steady state, the conduction rate through a slab is $R=\Delta Q/\Delta t$. The thickness $L$ is doubled and the cross-sectional area $A$ is also doubled, with $k$ and $\Delta T$ unchanged. What is the new rate?

  1. A. $R$
  2. B. $2R$
  3. C. $R/2$
  4. D. $4R$

Question 8 of 10

Two slabs of equal cross-sectional area $A=0.010\,\mathrm{m}^{2}$ are placed face-to-face in series. Slab 1 has $L_1=0.10\,\mathrm{m}$ and $k_1=100\,\mathrm{W/(m\cdot K)}$. Slab 2 has $L_2=0.20\,\mathrm{m}$ and $k_2=200\,\mathrm{W/(m\cdot K)}$. The outer faces are held at $T_H=100^\circ\mathrm{C}$ and $T_C=40^\circ\mathrm{C}$. In steady state, what is the interface temperature $T_i$?

  1. A. $50^\circ\mathrm{C}$
  2. B. $60^\circ\mathrm{C}$
  3. C. $80^\circ\mathrm{C}$
  4. D. $70^\circ\mathrm{C}$

Question 9 of 10

Two slabs spanning the same temperature difference $\Delta T=40\,\mathrm{K}$ are placed side by side in parallel. Each has thickness $L=0.10\,\mathrm{m}$ and area $A=0.0050\,\mathrm{m}^{2}$. One has $k=200\,\mathrm{W/(m\cdot K)}$ and the other has $k=50\,\mathrm{W/(m\cdot K)}$. What is the total conductive heat-transfer rate?

  1. A. $100\,\mathrm{W}$
  2. B. $250\,\mathrm{W}$
  3. C. $500\,\mathrm{W}$
  4. D. $1000\,\mathrm{W}$

Question 10 of 10

A student wants to compare the thermal conductivities of two metals using slabs of identical $A$ and $L$. Which procedure best isolates $k$?

  1. A. Heat each slab with a different heater power and compare final temperatures after $1\,\mathrm{min}$.
  2. B. Hold the same $\Delta T$ across each slab and measure the steady energy-transfer rate; the larger rate indicates the larger $k$.
  3. C. Measure only the specific heats, because $c$ and $k$ are always proportional.
  4. D. Weigh the slabs; the denser metal always has the larger $k$.