Specific Heat and Thermal Conductivity MCQ Practice

Question 1 of 10

Use the table. How much energy must be removed from a $1.5\,\mathrm{kg}$ glass sample to cool it from $70^\circ\mathrm{C}$ to $30^\circ\mathrm{C}$?

Material $c$ (J/(kg$\cdot$K)) $k$ (W/(m$\cdot$K))
Aluminum 900 205
Copper 390 400
Iron 450 80
Brass 380 110
Glass 840 1.0
Water 4180 —
Wood 1700 0.12
  1. A. $2.5\times 10^{4}\,\mathrm{J}$
  2. B. $5.0\times 10^{4}\,\mathrm{J}$
  3. C. $7.6\times 10^{4}\,\mathrm{J}$
  4. D. $1.0\times 10^{5}\,\mathrm{J}$

Question 2 of 10

A $0.50\,\mathrm{kg}$ brass sample at $100^\circ\mathrm{C}$ is placed in contact with a $1.00\,\mathrm{kg}$ aluminum sample at $20^\circ\mathrm{C}$ inside an insulated container. Use the table. Neglect any other heat capacities. Which value is closest to the equilibrium temperature?

Material $c$ (J/(kg$\cdot$K)) $k$ (W/(m$\cdot$K))
Aluminum 900 205
Copper 390 400
Iron 450 80
Brass 380 110
Glass 840 1.0
Water 4180 —
Wood 1700 0.12
  1. A. $27^\circ\mathrm{C}$
  2. B. $34^\circ\mathrm{C}$
  3. C. $50^\circ\mathrm{C}$
  4. D. $60^\circ\mathrm{C}$

Question 3 of 10

Which statement correctly distinguishes specific heat from heat capacity?

  1. A. Specific heat depends on sample mass; heat capacity does not.
  2. B. Heat capacity is $mc$ and is extrinsic; specific heat $c$ is intrinsic.
  3. C. Both quantities are intrinsic properties of the material.
  4. D. Heat capacity equals $Q/\Delta T$ per kilogram; specific heat equals $Q/\Delta T$ for the whole sample.

Question 4 of 10

Sample A absorbs energy $Q$ and rises by $\Delta T$. Sample B has three times the mass and twice the specific heat of A. If sample B absorbs the same energy $Q$, what is its temperature change?

  1. A. $\Delta T/6$
  2. B. $\Delta T/3$
  3. C. $\Delta T/2$
  4. D. $6\Delta T$

Question 5 of 10

The graph shows temperature versus time for $0.50\,\mathrm{kg}$ of two different materials heated at the same constant power $P=100\,\mathrm{W}$. Which material has the larger specific heat, and what is that specific heat?

Temperature versus time for materials X and Y of equal mass heated at 100 W.
  1. A. X; $c=500\,\mathrm{J/(kg\cdot K)}$
  2. B. Y; $c=500\,\mathrm{J/(kg\cdot K)}$
  3. C. X; $c=1000\,\mathrm{J/(kg\cdot K)}$
  4. D. Y; $c=1000\,\mathrm{J/(kg\cdot K)}$

Question 6 of 10

A wooden board has $k=0.12\,\mathrm{W/(m\cdot K)}$, area $A=2.0\,\mathrm{m}^{2}$, and thickness $L=0.050\,\mathrm{m}$. The faces differ by $25\,\mathrm{K}$. What is the conductive heat-transfer rate?

  1. A. $12\,\mathrm{W}$
  2. B. $60\,\mathrm{W}$
  3. C. $120\,\mathrm{W}$
  4. D. $300\,\mathrm{W}$

Question 7 of 10

A slab’s conduction rate is $R$. Separately, $\Delta T$ is tripled and $k$ is reduced to one-third of its original value, with $A$ and $L$ unchanged. What is the new rate?

  1. A. $R$
  2. B. $R/3$
  3. C. $3R$
  4. D. $9R$

Question 8 of 10

Two slabs of equal area $A=0.040\,\mathrm{m}^{2}$ and equal thickness $L=0.050\,\mathrm{m}$ are stacked in series. The hot-side slab has $k_1=50\,\mathrm{W/(m\cdot K)}$ and the cold-side slab has $k_2=200\,\mathrm{W/(m\cdot K)}$. Outer temperatures are $100^\circ\mathrm{C}$ and $20^\circ\mathrm{C}$. What is the interface temperature in steady state?

  1. A. $36^\circ\mathrm{C}$
  2. B. $50^\circ\mathrm{C}$
  3. C. $60^\circ\mathrm{C}$
  4. D. $84^\circ\mathrm{C}$

Question 9 of 10

Two different materials form parallel conduction paths between the same two temperatures. Which statement must be true in steady state?

  1. A. The heat-transfer rates through the two paths are equal.
  2. B. The temperature drop across each path equals the same overall $\Delta T$, and the total rate is the sum of the individual rates.
  3. C. The material with larger $k$ has the smaller temperature difference.
  4. D. The effective $L/k$ is the sum of the individual $L/k$ values.

Question 10 of 10

A student measures $k$ for a metal slab. Which data set is both necessary and sufficient, assuming steady one-dimensional conduction?

  1. A. Only the slab’s mass and specific heat.
  2. B. Only the temperatures of the two faces.
  3. C. Measured rate $\Delta Q/\Delta t$, face temperatures, and the slab’s $A$ and $L$.
  4. D. Only the time for the slab’s average temperature to rise by $10\,\mathrm{K}$ while insulated.