TOPIC 5.6 · STUDY

Newton's Second Law in Rotational Form

Newton's second law for rotation: net torque equals I alpha about one shared axis. Fixed I makes alpha track tau_net; fixed torque makes alpha fall as I grows. Signed torques, parallel-axis I, tau-alpha graphs, hanging-mass and Atwood pulleys with g = 10 m/s^2, and constant-torque spin-up or braking.

5.6.A

Newton's second law for rotation

Newton's second law for rotation is $\tau_{\mathrm{net}}=I\alpha$. The net torque, the angular acceleration, and the rotational inertia must all refer to the same fixed axis. Choose a positive sense once (counterclockwise is the usual choice). A positive $\tau_{\mathrm{net}}$ produces a positive $\alpha$. That does not require speeding up: if $\alpha$ has the opposite sign from the present $\omega$, the wheel slows, can stop, and can reverse.

When $I$ is fixed, $\alpha$ is proportional to $\tau_{\mathrm{net}}$. When the same nonzero torque acts on two rotors, $\alpha$ is inversely proportional to $I$. Ranking by torque alone fails when inertias differ. Counterexample: $\tau=4.0\,\mathrm{N\cdot m}$ on $I=1.0\,\mathrm{kg\cdot m^2}$ gives $\alpha=4.0\,\mathrm{rad/s^2}$, while the larger torque $\tau=6.0\,\mathrm{N\cdot m}$ on $I=3.0\,\mathrm{kg\cdot m^2}$ gives only $\alpha=2.0\,\mathrm{rad/s^2}$.

Net torque is the signed sum about the chosen axis. A motor applies $8.0\,\mathrm{N\cdot m}$ counterclockwise while friction applies $3.0\,\mathrm{N\cdot m}$ clockwise on a rotor with $I=2.5\,\mathrm{kg\cdot m^2}$. Taking counterclockwise as positive, $\tau_{\mathrm{net}}=8.0-3.0=5.0\,\mathrm{N\cdot m}$, so $\alpha=5.0/2.5=2.0\,\mathrm{rad/s^2}$ counterclockwise.

A tangential force $F$ at perpendicular distance $r$ from the axis produces torque $\tau=rF$, so $\alpha=rF/I$ when that torque is the net torque. Equal torques need not come from equal forces: $F$ at radius $R$ and $2F$ at radius $R/2$ both give $\tau=RF$ and the same $\alpha$ on a given $I$.

If the fixed axis is not through the center of mass, use the parallel-axis inertia. For a rigid body of mass $M$ with $I_{\mathrm{cm}}$ about a parallel central axis a distance $d$ away, $I=I_{\mathrm{cm}}+Md^2$, and $\tau_{\mathrm{net}}=(I_{\mathrm{cm}}+Md^2)\alpha$ about that fixed axis.

At any instant, $\tau_{\mathrm{net}}=0$ means $\alpha=0$, even if $\omega$ is not zero. A free rotor coasting at constant $\omega$ has zero net torque. Zero angular acceleration is about the rate of change of $\omega$, not about whether the object is spinning.

A graph of net torque versus angular acceleration is a straight line through the origin whose slope is $I$, because $\tau_{\mathrm{net}}=I\alpha$. The figure below shows $\tau=0.50\,\alpha$ for a rotor with $I=0.50\,\mathrm{kg\cdot m^2}$. If instead you plot applied torque while a constant friction torque opposes the motion, the slope is still $I$ and the torque-axis intercept equals the friction magnitude.

Net torque versus angular acceleration: straight line through the origin with slope 0.50.

The line $\tau=0.50\,\alpha$ has slope $I=0.50\,\mathrm{kg\cdot m^2}$. The marked point is $\alpha=4\,\mathrm{rad/s^2}$, $\tau=2\,\mathrm{N\cdot m}$.

Situation Relation What to watch
Fixed $I$ $\alpha\propto\tau_{\mathrm{net}}$ Double torque doubles $\alpha$
Fixed $\tau_{\mathrm{net}}$ $\alpha\propto 1/I$ Larger $I$ means smaller $\alpha$
Axis not through CM $I=I_{\mathrm{cm}}+Md^2$ Use $I$ about the fixed axis
Applied $\tau$ vs $\alpha$ with friction slope $=I$ Intercept is friction torque

A hanging mass $m$ is tied to a light string wrapped around a pulley of radius $R$ and inertia $I$ about a frictionless fixed axle. The string does not slip, so $a=R\alpha$. For the mass, $mg-T=ma$. For the pulley, $TR=I\alpha$. Solving with $g=10\,\mathrm{m/s^2}$ gives $a=mg/(m+I/R^2)$ and $T=mg\,I/(I+mR^2)$, so $T<mg$. With $m=2.0\,\mathrm{kg}$, $R=0.20\,\mathrm{m}$, and $I=0.080\,\mathrm{kg\cdot m^2}$, $I/R^2=0.080/0.040=2.0\,\mathrm{kg}$, so $a=(2.0)(10)/(2.0+2.0)=5.0\,\mathrm{m/s^2}$ and $T=(2.0)(10)(0.080)/(0.080+0.080)=10\,\mathrm{N}$, less than the $20\,\mathrm{N}$ weight.

For an Atwood machine whose pulley has inertia $I$ and radius $R$, with $m_2>m_1$, frictionless axle, and no slip, $a=(m_2-m_1)g/(m_1+m_2+I/R^2)$. The two string tensions are not equal: their difference supplies the torque $I\alpha$ that angularly accelerates the pulley.

Under constant net torque from rest, $\omega=\alpha t$ and $\theta=\tfrac12\alpha t^2$ with $\alpha=\tau_{\mathrm{net}}/I$. A brake that applies constant opposing torque of magnitude $C$ to a wheel of inertia $I$ spinning at speed $w$ stops it in time $Iw/C$ after angle $Iw^2/(2C)$, because $\alpha=-C/I$ from the rotational second law and the constant-$\alpha$ kinematic links.

Key points

  • $\tau_{\mathrm{net}}=I\alpha$ with torque, $\alpha$, and $I$ about the same axis; signs share one positive sense.
  • Fixed $I$: $\alpha\propto\tau_{\mathrm{net}}$. Same torque: $\alpha\propto 1/I$; a larger torque on a much larger $I$ can give a smaller $\alpha$.
  • Net torque is the signed sum; motor $8.0\,\mathrm{N\cdot m}$ CCW and friction $3.0\,\mathrm{N\cdot m}$ CW on $I=2.5\,\mathrm{kg\cdot m^2}$ give $\alpha=2.0\,\mathrm{rad/s^2}$ CCW.
  • Tangential $\tau=rF$, so $\alpha=rF/I$; $F$ at $R$ and $2F$ at $R/2$ produce the same torque.
  • Off-center fixed axis: $\tau_{\mathrm{net}}=(I_{\mathrm{cm}}+Md^2)\alpha$. If $\tau_{\mathrm{net}}=0$, then $\alpha=0$ even when $\omega\neq 0$.
  • Slope of $\tau_{\mathrm{net}}$ versus $\alpha$ is $I$; applied-torque plots with constant friction keep slope $I$ and show a friction intercept.
  • Hanging mass on a massive pulley: $a=mg/(m+I/R^2)$ and $T=mg\,I/(I+mR^2)<mg$ (use $g=10\,\mathrm{m/s^2}$ as needed).
  • Constant torque from rest: $\omega=\alpha t$, $\theta=\tfrac12\alpha t^2$. Opposing brake $C$ stops speed $w$ in time $Iw/C$ and angle $Iw^2/(2C)$.

Torque and alpha must refer to the same axis, using $I$ about that axis.

Practice this topic