TOPIC 6.1 · STUDY
Rotational Kinetic Energy
Rotational kinetic energy is one-half I omega squared: a nonnegative scalar set by rotational inertia and angular speed. A K-versus-omega-squared graph is a line through the origin with slope I/2, rigid-body KE splits into translation plus rotation about the CM, and hoop-versus-disk or equal-K cases fix relative omega.
6.1.A
Rotational kinetic energy
Rotational kinetic energy about a fixed axis is $$K_{\mathrm{rot}}=\tfrac12 I\omega^2.$$ It is a scalar and never negative. Reversing the spin at the same angular speed leaves $K_{\mathrm{rot}}$ unchanged because $\omega$ enters only as $\omega^2$. Tripling $\omega$ multiplies $K_{\mathrm{rot}}$ by $9$. The increase from angular speed $\omega$ to $3\omega$ is $$\Delta K=\tfrac12 I\bigl((3\omega)^2-\omega^2\bigr)=\tfrac12 I(9\omega^2-\omega^2)=4I\omega^2.$$
Solving for inertia gives $I=2K/\omega^2$. A graph of $K$ versus $\omega^2$ is therefore a straight line through the origin with slope $I/2$. A graph of $K$ versus nonnegative $\omega$ is a parabola opening upward. A nonzero intercept on a $K$-versus-$\omega^2$ plot means an energy offset in the data, not pure rotational kinetic energy measured from the origin.
The figure below plots $K=0.60\,\omega^2$ for a rotor with $I/2=0.60$, so $I=1.20\,\mathrm{kg\cdot m^2}$. At $\omega^2=10$ the kinetic energy is $6.0\,\mathrm{J}$, matching the marked point.
The line $K=0.60\,\omega^2$ has slope $I/2=0.60$, so $I=1.20\,\mathrm{kg\cdot m^2}$. The marked point is $\omega^2=10$, $K=6\,\mathrm{J}$.
Two equal point masses $m$ fixed a distance $r$ from an axle have $I=2mr^2$, so $$K=\tfrac12(2mr^2)\omega^2=mr^2\omega^2.$$ Each mass moves at speed $v=r\omega$, and summing $\tfrac12 m v^2$ for both masses recovers the same energy. Do not assign rim speed to every bit of an extended object: a uniform disk about its central axis has $I=\tfrac12 MR^2$, so $$K=\tfrac14 MR^2\omega^2,$$ half of what a single point mass $M$ at the rim would have at the same $\omega$.
A thin hoop ($I=MR^2$) and a uniform disk ($I=\tfrac12 MR^2$) with the same $M$, $R$, and $\omega$ store different rotational energy. The hoop has $$K_{\mathrm{hoop}}=\tfrac12 MR^2\omega^2,$$ while the disk has $$K_{\mathrm{disk}}=\tfrac14 MR^2\omega^2.$$ At the same $\omega$ the hoop has twice the rotational kinetic energy of the disk.
For a rigid body the total kinetic energy is $$K=\tfrac12 M v_{\mathrm{cm}}^2+\tfrac12 I_{\mathrm{cm}}\omega^2.$$ The first term is translation of the center of mass; the second is rotation about the center of mass. A body on a fixed axle can have $v_{\mathrm{cm}}=0$ while $K_{\mathrm{rot}}$ is nonzero, so the two terms are not double-counting the same motion. Example: $M=2.0\,\mathrm{kg}$, $v_{\mathrm{cm}}=3.0\,\mathrm{m/s}$, $I_{\mathrm{cm}}=0.50\,\mathrm{kg\cdot m^2}$, and $\omega=4.0\,\mathrm{rad/s}$ give translational energy $\tfrac12(2.0)(3.0)^2=9.0\,\mathrm{J}$ and rotational energy $\tfrac12(0.50)(4.0)^2=4.0\,\mathrm{J}$.
If two rotors store equal rotational kinetic energy and $I_B=4I_A$, then $\tfrac12 I_A\omega_A^2=\tfrac12 I_B\omega_B^2$ forces $\omega_B=\omega_A/2$. At fixed $K$, smaller $I$ means larger $\omega$. A camera that sees a painted mark in the same place in every frame cannot distinguish zero spin from an integer number of full turns per frame, so it cannot fix $K$ from that image sequence alone.
Equal translational and rotational kinetic energy, $\tfrac12 M v_{\mathrm{cm}}^2=\tfrac12 I_{\mathrm{cm}}\omega^2$, is one energy condition only. It does not by itself prove rolling without slipping; that kinematic link relates $v_{\mathrm{cm}}$ and $\omega$ through a contact radius and must be stated separately.
| Idea | Relation |
|---|---|
| Rotational KE | $K=\tfrac12 I\omega^2$ |
| Inertia from $K$ | $I=2K/\omega^2$ |
| Slope of $K$ vs $\omega^2$ | $I/2$ |
| Two masses at radius $r$ | $I=2mr^2$, $K=mr^2\omega^2$ |
| Uniform disk about center | $I=\tfrac12 MR^2$, $K=\tfrac14 MR^2\omega^2$ |
| Rigid-body total $K$ | $\tfrac12 Mv_{\mathrm{cm}}^2+\tfrac12 I_{\mathrm{cm}}\omega^2$ |
Key points
- $K_{\mathrm{rot}}=\tfrac12 I\omega^2$ is a nonnegative scalar; reverse spin at the same speed leaves $K$ unchanged.
- Triple $\omega$ multiplies $K$ by $9$; the rise from $\omega$ to $3\omega$ is $\Delta K=4I\omega^2$.
- A $K$-versus-$\omega^2$ graph through the origin has slope $I/2$; $K$ versus $\omega$ is a parabola.
- Two point masses: $I=2mr^2$ and $K=mr^2\omega^2$, matching $\sum\tfrac12 mv^2$ with $v=r\omega$.
- Uniform disk: $K=\tfrac14 MR^2\omega^2$, half the rim-point-mass value; hoop has twice the disk $K$ at equal $\omega$.
- Total $K=\tfrac12 Mv_{\mathrm{cm}}^2+\tfrac12 I_{\mathrm{cm}}\omega^2$; fixed axle can have $v_{\mathrm{cm}}=0$ with nonzero $K_{\mathrm{rot}}$.
- Equal $K$ with $I_B=4I_A$ gives $\omega_B=\omega_A/2$; a once-per-frame mark does not fix $K$.
- Equal translational and rotational energy alone does not prove rolling without slipping.
Rotational kinetic energy uses angular speed squared, so the direction of spin does not make $K$ negative.