TOPIC 6.2 · STUDY
Torque and Work
Rotational work by a torque is W = tau Delta theta with angle in radians. Net work equals the change in rotational kinetic energy. Work is the signed area under a torque-versus-angle graph, not under a torque-versus-time graph.
6.2.A
Torque and work
When a constant torque and an angular displacement share the same sense, the work done by that torque is $W=\tau\Delta\theta$, with $\Delta\theta$ in radians. Choose a sign convention (counterclockwise positive in this guide). A torque in the positive sense through a positive $\Delta\theta$ does positive work. An opposing torque does negative work and removes rotational kinetic energy.
Example: a drive torque $\tau=2.5\,\mathrm{N}\cdot\mathrm{m}$ turns a rotor through two full revolutions in the same sense. Two revolutions are $\Delta\theta=4\pi\,\mathrm{rad}$, so $W=(2.5)(4\pi)=10\pi\,\mathrm{J}$. If instead a brake of magnitude $2.5\,\mathrm{N}\cdot\mathrm{m}$ opposed that same $4\pi\,\mathrm{rad}$ turn, its work would be $-10\pi\,\mathrm{J}$.
For a torque that varies with angle, work is the signed area between the $\tau$-versus-$\theta$ curve and the $\theta$-axis. Area above the axis is positive; area below is negative. The figure below is a triangle from $(0,0)$ to $(2,8)$ to $(4,0)$, so the area is $\frac{1}{2}(4)(8)=16\,\mathrm{J}$ of work. Do not confuse this with a torque-versus-time graph: the area under $\tau$ versus $t$ is angular impulse (topic 6.3), not work.
Signed area under $\tau(\theta)$ is work. This triangle has base 4 and height 8, so $W=16\,\mathrm{J}$.
The rotational work-energy theorem links net work to kinetic energy: $W_{\mathrm{net}}=\Delta K=\frac{1}{2}I(\omega_f^2-\omega_i^2)$. Example: a rotor with $I=2.0\,\mathrm{kg}\cdot\mathrm{m^2}$ starts at rest and receives $W_{\mathrm{net}}=16\,\mathrm{J}$. Then $16=\frac{1}{2}(2.0)\omega_f^2$, so $\omega_f=4.0\,\mathrm{rad/s}$. The same net work on two different inertias produces the same final $K$, not the same final $\omega$.
A torque that holds a wheel still does zero work because $\Delta\theta=0$, even if $\tau$ is large. A force applied through the axle has zero lever arm, so zero torque and zero rotational work, regardless of how hard you push.
Add signed works from every torque. Example: a motor does $+12\,\mathrm{J}$ while a brake does $-3.0\,\mathrm{J}$. If the rotor starts with $K_i=4.0\,\mathrm{J}$, then $W_{\mathrm{net}}=+9.0\,\mathrm{J}$ and $K_f=4.0+9.0=13\,\mathrm{J}$.
| Quantity | Relation |
|---|---|
| Constant torque, same sense | $W=\tau\Delta\theta$ |
| Work-energy | $W_{\mathrm{net}}=\frac{1}{2}I(\omega_f^2-\omega_i^2)$ |
| Stopping under opposing $b$ | $\Delta\theta=I\omega^2/(2b)$ |
| Average torque magnitude | $|\tau|_{\mathrm{avg}}=|W|/|\Delta\theta|$ |
A constant opposing torque of magnitude $b$ brings a rotor of inertia $I$ and initial speed $\omega$ to rest. The work is $-b\Delta\theta$, and the kinetic-energy change is $-\frac{1}{2}I\omega^2$, so $\Delta\theta=I\omega^2/(2b)$. Doubling the initial $\omega$ multiplies that stopping angle by four.
Over any interval, the average torque magnitude is $|W|/|\Delta\theta|$. If a rotor returns to the same angular speed (even after a brief reversal), $K$ is unchanged when $I$ is fixed because $K$ depends on $\omega^2$, so the net work must be zero. Power is work per time, so the same work done in less time means greater average power.
Key points
- For constant torque, $W=\tau\Delta\theta$ with $\Delta\theta$ in radians; opposing torques do negative work.
- Work is the signed area under a $\tau$-versus-$\theta$ graph.
- $W_{\mathrm{net}}=\Delta K=\frac{1}{2}I(\omega_f^2-\omega_i^2)$; same work means same $\Delta K$, not same $\Delta\omega$.
- Still wheel ($\Delta\theta=0$) or force through the axle: zero rotational work.
- Add every signed work; motor $+12\,\mathrm{J}$ and brake $-3\,\mathrm{J}$ with $K_i=4\,\mathrm{J}$ end at $13\,\mathrm{J}$.
- Opposing $b$ stops a rotor after $\Delta\theta=I\omega^2/(2b)$; doubling $\omega$ quadruples that angle.
- Average $|\tau|$ equals $|W|/|\Delta\theta|$; return to the same $|\omega|$ means $W_{\mathrm{net}}=0$ if $I$ is constant.
The area under a torque-versus-time graph is angular impulse, not work.