Newton's Second Law in Rotational Form MCQ Practice

Question 1 of 10

A fixed-axis rotor has inertia 2 kg m² and net torque 6 N m. What is its angular acceleration magnitude?

  1. A. 12 rad/s²
  2. B. 1/3 rad/s²
  3. C. 8 rad/s²
  4. D. 3 rad/s²

Question 2 of 10

A wheel has fixed rotational inertia. Its net torque doubles. What happens to its angular acceleration?

  1. A. It doubles.
  2. B. It halves.
  3. C. It quadruples.
  4. D. It stays unchanged.

Question 3 of 10

Two rotors have inertias I and 3I. The same nonzero net torque acts on both. How do their angular acceleration magnitudes compare?

  1. A. The first is nine times the second.
  2. B. The first is three times the second.
  3. C. The second is three times the first.
  4. D. They are equal.

Question 4 of 10

A motor exerts 10 N m counterclockwise while friction exerts 4 N m clockwise on a rotor of inertia 3 kg m². What is its angular acceleration?

  1. A. 2 rad/s² clockwise
  2. B. 10/3 rad/s² counterclockwise
  3. C. 2 rad/s² counterclockwise
  4. D. 14/3 rad/s² counterclockwise

Question 5 of 10

A wheel rotates clockwise while the net torque tends counterclockwise. What happens initially?

  1. A. Its clockwise angular speed increases.
  2. B. Its angular velocity changes immediately to counterclockwise.
  3. C. Its angular acceleration is zero.
  4. D. Its clockwise angular speed decreases.

Question 6 of 10

A 12 N tangential force acts at radius 0.20 m on a fixed-axis wheel of inertia 0.60 kg m². Other torques are negligible. What is the angular acceleration magnitude?

  1. A. 4 rad/s²
  2. B. 20 rad/s²
  3. C. 1.44 rad/s²
  4. D. 0.25 rad/s²

Question 7 of 10

A graph of net torque versus angular acceleration for one rigid rotor has what slope?

  1. A. Its mass alone
  2. B. Its rotational inertia
  3. C. The reciprocal of its rotational inertia
  4. D. Its angular velocity

Question 8 of 10

A massive pulley accelerates as two strings pull tangentially at the same radius and exert unequal opposing torques. Why can the string tensions differ?

  1. A. The pulley inertia requires equal tensions.
  2. B. Unequal tensions are possible only if the strings stretch.
  3. C. A nonzero net torque is needed to angularly accelerate the pulley.
  4. D. Newton’s third law never applies to strings.

Question 9 of 10

A rigid wheel starts from rest under constant net torque 8 N m. Its inertia is 4 kg m². What is its angular speed after 3 s?

  1. A. 2 rad/s
  2. B. 24 rad/s
  3. C. 12 rad/s
  4. D. 6 rad/s

Question 10 of 10

The table lists net torque and inertia for three rotors. Which has the greatest angular acceleration magnitude?

Rotor Net torque (N m) I (kg m²)
P 4 2
Q 9 3
R 5 5
  1. A. Rotor Q
  2. B. Rotor P
  3. C. Rotor R
  4. D. All three are equal.