TOPIC 5.5 · STUDY
Rotational Equilibrium and Newton's First Law in Rotational Form
Rotational equilibrium means zero net external torque, so angular velocity stays constant. Static equilibrium of a rigid body also needs zero net force. Balance moments on beams, seesaws, and hinged cables; choosing the axis carefully removes unknown forces from the torque equation.
5.5.A
Rotational equilibrium
Rotational equilibrium about a chosen axis means the net external torque is zero. Then the angular velocity $\omega$ is constant: the object can stay at rest, or it can keep spinning at whatever $\omega$ it already has. A wheel sitting still with a nonzero net torque is not in equilibrium and will start to turn. A wheel already spinning with zero net torque keeps that same $\omega$.
Static equilibrium of a rigid body needs both $\sum\vec{F}=0$ and $\sum\vec{\tau}=0$. The two conditions are separate. A couple (equal opposite forces with parallel lines of action that do not share a line) has zero net force and nonzero net torque: the center of mass does not accelerate, but the rotation changes. A single force through the center of mass can accelerate translation while producing zero torque about that center.
Constant $\omega$ can coexist with an accelerating center of mass (rotational equilibrium without translational equilibrium). The reverse also occurs: a couple can change $\omega$ while the center of mass moves at constant velocity.
End supports push up with NL and NR; the beam weight W acts at the midpoint and pulls down.
On a seesaw, opposing moments about the pivot balance. A $40\,\mathrm{N}$ load $1.5\,\mathrm{m}$ left of the pivot needs a $60\,\mathrm{N}$ load $1.0\,\mathrm{m}$ on the right, because $40(1.5)=60$ and $60(1.0)=60$. When both sides use the same $g$, masses cancel and the balance condition is $m d=M x$.
A uniform beam of weight $W$ on two end supports with no other load has $N_L=N_R=W/2$ by symmetry and vertical force balance. With an added load, take torques about one support so that support's unknown reaction drops out. Example: a $4.0\,\mathrm{m}$ beam of weight $80\,\mathrm{N}$ (at the center) carries a $120\,\mathrm{N}$ load $1.0\,\mathrm{m}$ from the left end. About the left end, $N_R(4.0)=80(2.0)+120(1.0)=280$, so $N_R=70\,\mathrm{N}$. Vertical balance then gives $N_L+70=80+120$, so $N_L=130\,\mathrm{N}$.
Choosing the axis at a hinge removes the unknown hinge force from the torque equation, because that force has zero lever arm about its own point of application. You still need $\sum F_x=0$ and $\sum F_y=0$ afterward to find the hinge components.
A uniform horizontal beam of weight $W$ and length $L$ is hinged at one end with a cable at the other end at angle $\theta$ above the horizontal. Torques about the hinge give $T\sin\theta\, L=W(L/2)$, so $T=W/(2\sin\theta)$. A shallower cable (smaller $\theta$) needs a larger tension to keep the same vertical moment arm. Then split $T$ into $T\cos\theta$ and $T\sin\theta$ and use force balance to find the hinge.
If a support sits inward from the end and a person walks past that support, the far reaction can drop to zero and the beam starts to tip about the near support. Tipping begins when the person's moment about that near support exceeds the opposing moment of the beam weight. For a uniform beam of length $L$ with the support a distance $d>L/2$ from the left end (so the center of mass is to the left of the support) and the person at $x>d$, that condition is $W_p(x-d)>W(d-L/2)$.
If a stick's own weight acts at the pivot, that weight produces no torque about the pivot, so it does not shift the balance positions of hanging loads. It does increase the upward support force at the pivot by the stick's weight.
Zero net torque about one axis plus a nonzero net force does not prove equilibrium. When $\sum\vec{F}\neq 0$, the torque about a different axis can differ, so a single-axis torque check is not enough by itself.
| Situation | Net force | Net torque | What happens |
|---|---|---|---|
| Wheel at rest, $\sum\tau\neq 0$ | Any | Nonzero | Begins to angularly accelerate; not in equilibrium |
| Spinning wheel, $\sum\tau=0$ | Any | Zero | $\omega$ stays constant |
| Couple only | Zero | Nonzero | CM velocity constant; $\omega$ changes |
| Force through CM only | Nonzero | Zero about CM | CM accelerates; no torque about CM |
| Uniform beam, end supports, no load | Zero | Zero | Each support is $W/2$ |
| Hinged beam with cable | Zero | Zero | $T=W/(2\sin\theta)$; then find hinge from $\sum\vec{F}=0$ |
Key points
- Rotational equilibrium means $\sum\tau=0$ about the chosen axis, so $\omega$ is constant (including staying at rest).
- Static equilibrium of a rigid body needs both $\sum\vec{F}=0$ and $\sum\vec{\tau}=0$; a couple and a force through the CM show the two are independent.
- Seesaw balance: opposing moments equal; with the same $g$, masses cancel as $md=Mx$.
- On a loaded beam, take torques about one support to remove that unknown, then use vertical force balance for the other.
- An axis at a hinge drops the hinge force from the torque equation; still use force balance for hinge components.
- For a hinged uniform beam with an end cable, $T=W/(2\sin\theta)$; smaller $\theta$ means larger $T$.
- Walking past an inward support can zero the far reaction and tip the beam; compare moments about the near support.
- Weight acting at the pivot does not change load balance positions but does raise the support force.
Zero net torque means angular velocity stays constant; it does not mean the object must be at rest.