TOPIC 3.4 · STUDY
Conservation of Energy
Conservation of energy starts with choosing a system. For frictionless motion, mechanical energy K plus gravitational potential (and spring potential when a spring is inside the system) stays constant. Dissipative work or external work changes the mechanical total while total energy remains conserved.
3.4.A
Conservation of energy
Always choose the system before writing energy statements. Gravitational potential energy $U_g=mgy$ is an internal store only when Earth is inside the system. For the object alone, gravity is an external force that does work across the boundary, so you track that work instead of using $U_g$. Elastic potential energy $U_s=\tfrac12 kx^2$ is internal to an object-spring system; if the spring sits outside your boundary, the spring force does external work.
Take $g=10\,\mathrm{m/s^2}$ in every numerical example below. On a frictionless track with Earth in the system and no springs, mechanical energy $K+U_g$ is constant. Released from rest at height $h$ above a chosen zero, $\tfrac12 mv^2=mgh$, so mass cancels and $v=\sqrt{2gh}$. The lowest point on the path has the greatest speed. Points at equal height have equal speeds, which is why a roller-coaster car matching height at two locations has the same speed there if mechanical energy is conserved.
A cart released from the $3\,\mathrm{m}$ shelf on a frictionless track has its greatest speed on the low run at height $0$.
Example: a $2.0\,\mathrm{kg}$ cart starts from rest on that $3.0\,\mathrm{m}$ shelf. At the bottom, $v=\sqrt{2(10)(3.0)}=\sqrt{60}\approx 7.7\,\mathrm{m/s}$, and $K=mgh=(2.0)(10)(3.0)=60\,\mathrm{J}$. Two frictionless ramps that share the same start and end heights give that same final speed, because only the vertical drop enters the energy equation. Travel times can differ: a steeper early drop builds speed sooner even though the ending speed matches.
A track normal force is perpendicular to the instantaneous displacement, so it does no work. A vertical loop on a frictionless track therefore still conserves $K+U_g$. At the top of a loop of radius $R$, the minimum contact condition is $N=0$, leaving gravity as the centripetal provider: $mg=mv_t^2/R$, so $v_t^2=gR$. Taking $U_g=0$ at the bottom, the top sits at height $2R$. From rest at release height $h$ to that top,
$$mgh=mg(2R)+\tfrac12 m(gR)\implies h=2R+\tfrac12 R=2.5R.$$
For $R=2.0\,\mathrm{m}$, the minimum release height above the bottom is $h=5.0\,\mathrm{m}$, and the minimum top speed is $v_t=\sqrt{(10)(2.0)}\approx 4.5\,\mathrm{m/s}$.
An ideal spring launching a block on a level frictionless surface converts elastic energy into kinetic energy: $\tfrac12 kx^2=\tfrac12 mv^2$, so $v=x\sqrt{k/m}$. The lighter mass is faster; $v$ scales as $1/\sqrt{m}$. With the same compression, mass $4m$ is half as fast as mass $m$. Numerically, $k=200\,\mathrm{N/m}$ and $x=0.20\,\mathrm{m}$ store $U_s=4.0\,\mathrm{J}$. A $1.0\,\mathrm{kg}$ block leaves at $v=2.0\,\mathrm{m/s}$; a $4.0\,\mathrm{kg}$ block leaves at $1.0\,\mathrm{m/s}$.
| State | $K$ (J) | $U_s$ (J) | $K+U_s$ (J) |
|---|---|---|---|
| Fully compressed, at rest | 0 | 12 | 12 |
| Equal K and U_s | 6 | 6 | 12 |
| Leaving the spring | 12 | 0 | 12 |
In an isolated cart-spring system on a level frictionless track, $K$ and $U_s$ trade off while their sum stays constant. When $K=U_s$ at one point, each store holds half the total mechanical energy, as in the middle row above.
If measured kinetic energy is less than the drop in $U_g$, the difference became thermal energy, sound, or deformation. Total energy is still conserved; mechanical energy is not. On a rough ramp at constant speed, $\Delta K=0$, so the entire loss in $U_g$ becomes thermal energy of the contacting surfaces in a block-ramp-Earth system. Kinetic friction does work $W_f=-f_k L$ along path length $L$, so a longer rough path removes more mechanical energy for the same $f_k$.
External work changes mechanical energy when thermal loss is negligible: $W_{\mathrm{ext}}=\Delta K+\Delta U$. A motor that pulls a cart so it both climbs and speeds up supplies that sum. A generator extracting energy while a cart descends at constant speed takes energy equal to the decrease in $U_g$, because $\Delta K=0$ and that extracted energy is the energy leaving the mechanical stores.
Combined example: a block of mass $m$ is released from rest at height $h$, crosses a rough horizontal patch of length $L$ with coefficient $\mu_k$, then compresses an ideal spring of constant $k$ on a frictionless stretch. Taking $U_g=0$ on the patch and including Earth and the spring in the system,
$$mgh-\mu_k mgL=\tfrac12 kx^2.$$
The block reaches the spring only if $h\ge\mu_k L$ (otherwise friction removes all of the initial $U_g$ before the patch ends). With $m=3.0\,\mathrm{kg}$, $h=2.0\,\mathrm{m}$, $\mu_k=0.25$, $L=4.0\,\mathrm{m}$, and $k=150\,\mathrm{N/m}$: $mgh=60\,\mathrm{J}$, friction removes $\mu_k mgL=30\,\mathrm{J}$, and $\tfrac12 kx^2=30\,\mathrm{J}$ gives $x=\sqrt{0.40}\approx 0.63\,\mathrm{m}$. Here $h=2.0\,\mathrm{m}$ exceeds $\mu_k L=1.0\,\mathrm{m}$, so the spring is reached and compressed.
Key points
- Choose the system first: $U_g$ is internal only with Earth inside; $U_s$ is internal only with the spring inside.
- Frictionless track with Earth in the system: $K+U_g$ is constant; from rest, $v=\sqrt{2gh}$ and mass cancels.
- Lowest height means greatest speed; equal heights mean equal speeds when mechanical energy is conserved.
- Same start and end heights on frictionless ramps fix the same final speed; travel time can still differ.
- Track normal force does no work, so a frictionless loop conserves $K+U_g$; minimum top contact needs $v_t^2=gR$ and release height $h=2.5R$ above the bottom.
- Ideal spring launch: $\tfrac12 kx^2=\tfrac12 mv^2$, so $v\propto 1/\sqrt{m}$; mass $4m$ is half as fast as mass $m$ at the same $x$.
- Friction or other dissipation turns mechanical energy into thermal (or similar) forms; $W_f=-f_k L$, and longer rough paths remove more.
- When losses are negligible, $W_{\mathrm{ext}}=\Delta K+\Delta U$; a constant-speed generator extracts energy equal to the drop in $U_g$.
Mechanical energy can decrease while total energy is conserved: the missing mechanical energy has moved into thermal, sound, deformation, or another store.