TOPIC 3.5 · STUDY
Power
Power is the rate of energy transfer: average power is energy divided by time, instantaneous power is F dot v, and graphs link slope and signed area to power and energy. Climbers, motors, winches, grades, pumps, and constant-power acceleration are worked with g = 10 m/s^2.
3.5.A
Power
Power is how fast energy is transferred. Average power over an interval is $$P_{\mathrm{avg}}=\frac{W}{\Delta t}=\frac{\Delta E}{\Delta t},$$ where $W$ or $\Delta E$ is the energy transferred in time $\Delta t$. The SI unit is the watt: $1\,\mathrm{W}=1\,\mathrm{J/s}$. To compare machines, divide each energy transfer by its time; ranking by energy alone is not enough.
Example: motor A transfers $180\,\mathrm{J}$ in $6.0\,\mathrm{s}$, so $P_{\mathrm{avg}}=180/6.0=30\,\mathrm{W}$. Motor B transfers $240\,\mathrm{J}$ in $4.0\,\mathrm{s}$, so $P_{\mathrm{avg}}=240/4.0=60\,\mathrm{W}$. Motor B is more powerful even though both transfer hundreds of joules.
Two climbers of equal mass $m=60\,\mathrm{kg}$ rise the same height $h=5.0\,\mathrm{m}$ with the same start and finish speeds. Ideal work against gravity is the same for both: $W=mgh=(60)(10)(5.0)=3000\,\mathrm{J}$ using $g=10\,\mathrm{m/s^2}$. Path length along the stairs does not change that ideal gravitational work. Climber X finishes in $10\,\mathrm{s}$ and climber Y in $20\,\mathrm{s}$, so $P_X=3000/10=300\,\mathrm{W}$ and $P_Y=3000/20=150\,\mathrm{W}$. Half the time at the same work means twice the average power.
Instantaneous power delivered by a force is the dot product $$P=\vec{F}\cdot\vec{v}=Fv\cos\theta,$$ where $\theta$ is the angle between $\vec{F}$ and $\vec{v}$. When the force is parallel to the velocity, $\theta=0$ and $P=Fv$. When the force is perpendicular to the velocity, $\theta=90^\circ$ and $P=0$, even if that force is changing the direction of motion.
Example: a $24\,\mathrm{N}$ force acts in the direction of a cart moving at $3.0\,\mathrm{m/s}$, so $P=(24)(3.0)=72\,\mathrm{W}$. The same $24\,\mathrm{N}$ force acting at $90^\circ$ to the velocity delivers $P=0$. A centripetal force that only turns the path transfers no energy at that instant.
Powers from different interactions add with sign. Positive power transfers energy into the system; negative power transfers energy out. Example: a drive force delivers $+45\,\mathrm{W}$ while friction delivers $-15\,\mathrm{W}$. The net rate of change of the system's energy is $45-15=30\,\mathrm{W}$. A positive but decreasing power still transfers energy in; only the rate is falling.
On a graph of energy transferred versus time, the slope of a segment is the power during that interval. On a graph of power versus time, the signed area under the curve is the energy transferred. Area below the axis is negative and means net energy left through that interaction.
Slopes are $40\,\mathrm{W}$ from $0$ to $2\,\mathrm{s}$, $80\,\mathrm{W}$ from $2$ to $4\,\mathrm{s}$, and $20\,\mathrm{W}$ from $4$ to $7\,\mathrm{s}$. The middle segment has the greatest power because it is the steepest.
For the graph above, the average power from $0$ to $7\,\mathrm{s}$ is $300/7\approx 43\,\mathrm{W}$. Interval powers match the slopes: $80/2=40\,\mathrm{W}$, $160/2=80\,\mathrm{W}$, and $60/3=20\,\mathrm{W}$. Steepest slope means greatest power, not necessarily the largest final energy on that segment alone.
If a constant force stays parallel to the velocity while speed rises, $P=Fv$ rises in proportion to $v$. Example: $F=20\,\mathrm{N}$ at $v=2.0\,\mathrm{m/s}$ gives $P=40\,\mathrm{W}$; at $v=5.0\,\mathrm{m/s}$ the same force gives $P=100\,\mathrm{W}$. The reverse case is constant positive power: then $F=P/v$, so the pulling force decreases as the object speeds up. At fixed $P=80\,\mathrm{W}$, $F=40\,\mathrm{N}$ when $v=2.0\,\mathrm{m/s}$ and $F=16\,\mathrm{N}$ when $v=5.0\,\mathrm{m/s}$.
A motor delivering constant mechanical power $P$ from rest on a frictionless track transfers energy $Pt$ into kinetic energy: $$Pt=\tfrac12 m v^2\quad\Rightarrow\quad v=\sqrt{\frac{2Pt}{m}}.$$ Acceleration is not constant; it decreases as speed rises because $F=P/v$ falls. Example: $m=8.0\,\mathrm{kg}$ and $P=16\,\mathrm{W}$. At $t=4.0\,\mathrm{s}$, $v=\sqrt{2(16)(4.0)/8.0}=4.0\,\mathrm{m/s}$. At $t=16\,\mathrm{s}$ (four times as long), $v=8.0\,\mathrm{m/s}$, double the earlier speed. Average acceleration from $0$ to $4.0\,\mathrm{s}$ is $1.0\,\mathrm{m/s^2}$; from $4.0$ to $16\,\mathrm{s}$ it is only $(8.0-4.0)/12=0.33\,\mathrm{m/s^2}$.
A winch or elevator cable accelerating a mass $m$ upward at $a$ has tension $T=m(g+a)$ with up positive. Instantaneous power delivered by the cable is $$P=Tv=m(g+a)v.$$ At constant speed, $a=0$ and $P=mgv$. Example: $m=50\,\mathrm{kg}$, $a=2.0\,\mathrm{m/s^2}$, $v=3.0\,\mathrm{m/s}$, and $g=10\,\mathrm{m/s^2}$ give $T=50(10+2.0)=600\,\mathrm{N}$ and $P=(600)(3.0)=1800\,\mathrm{W}$. At the same speed with $a=0$, $P=(50)(10)(3.0)=1500\,\mathrm{W}$.
A car of mass $m$ climbing a grade at constant speed $v$ against a resistive force $f$ needs a drive force $mg\sin\theta+f$ along the road, so $$P=(mg\sin\theta+f)v.$$ If the forces stay the same, doubling $v$ doubles the required power. Example: $m=1200\,\mathrm{kg}$, $\sin\theta=0.10$, $f=200\,\mathrm{N}$, and $v=10\,\mathrm{m/s}$ give drive force $(1200)(10)(0.10)+200=1400\,\mathrm{N}$ and $P=(1400)(10)=14000\,\mathrm{W}$. At $20\,\mathrm{m/s}$ with the same forces, $P=28000\,\mathrm{W}$.
A pump lifting water at constant useful power, neglecting speed change of the water, obeys $$P=\left(\frac{\Delta m}{\Delta t}\right)gh.$$ Doubling the lift height at fixed $P$ halves the mass flow rate. Example: $P=500\,\mathrm{W}$, $h=5.0\,\mathrm{m}$, and $g=10\,\mathrm{m/s^2}$ give $\Delta m/\Delta t=500/(10\cdot 5.0)=10\,\mathrm{kg/s}$. At $h=10\,\mathrm{m}$ with the same power, $\Delta m/\Delta t=5.0\,\mathrm{kg/s}$.
A motor that both lifts and speeds up a mass $M$ through height $h$ while raising speed from rest to $v$ transfers $$\Delta E=Mgh+\tfrac12 M v^2.$$ Average power is that energy divided by the elapsed time $t$. Constant-speed lifting through the same height in the same time transfers only $Mgh$, so its average power is smaller: $Mgh/t$. Example: $M=40\,\mathrm{kg}$, $h=3.0\,\mathrm{m}$, $v=4.0\,\mathrm{m/s}$, $t=6.0\,\mathrm{s}$, and $g=10\,\mathrm{m/s^2}$. Then $\Delta E=(40)(10)(3.0)+\tfrac12(40)(4.0)^2=1200+320=1520\,\mathrm{J}$ and $P_{\mathrm{avg}}=1520/6.0\approx 253\,\mathrm{W}$. Constant-speed lifting would give only $1200/6.0=200\,\mathrm{W}$.
| Situation | Useful relation |
|---|---|
| Average power | $P_{\mathrm{avg}}=\Delta E/\Delta t$ |
| Instantaneous power | $P=Fv\cos\theta$ |
| Constant power, $F\parallel v$ | $F=P/v$ |
| Constant $P$ from rest | $v=\sqrt{2Pt/m}$ |
| Winch accelerating up | $P=m(g+a)v$ |
| Grade at constant $v$ | $P=(mg\sin\theta+f)v$ |
| Pump, neglect $\Delta K$ | $P=(\Delta m/\Delta t)gh$ |
Key points
- Average power is energy transferred per time: $P_{\mathrm{avg}}=W/\Delta t=\Delta E/\Delta t$ in watts.
- Equal $mgh$ in half the time means twice the average power; path length does not change ideal gravitational work.
- Instantaneous power is $P=\vec{F}\cdot\vec{v}$; perpendicular force gives $P=0$.
- Powers add with sign; positive decreasing power still transfers energy in.
- Slope of $E$ versus $t$ is power; signed area under $P$ versus $t$ is energy transferred.
- Constant $F\parallel v$: power rises with speed. Constant $P$: $F=P/v$ falls as speed rises.
- Constant power from rest: $v=\sqrt{2Pt/m}$; four times the time doubles $v$, and $a$ decreases.
- Winch, grade, pump, and lift-plus-speed cases follow from $P=Fv$ or $\Delta E/\Delta t$ with $g=10\,\mathrm{m/s^2}$.
Power is a rate: a large energy transfer can have small power if it takes a long time.