Spring Forces FRQ Practice

Responses receive AI feedback against a rubric after submission. Scores are practice estimates.

Question 1 of 5

A student hangs known masses from a spring and records the spring’s total length, obtaining the data in the table. Use $g=10\,\mathrm{m/s^2}$. (a) State which two quantities should be plotted so that the graph is a straight line, and state what the slope represents. (b) Determine the spring constant. (c) Determine the relaxed length of the spring.

Hanging mass (kg) Total spring length (m)
0.10 0.22
0.20 0.26
0.30 0.30
0.40 0.34

Question 2 of 5

Two ideal springs with constants $k_1$ and $k_2$ are joined end to end, and a load of magnitude $F$ hangs from the bottom of the pair. (a) Explain why each spring carries the same force $F$. (b) Derive an expression for the effective spring constant $k_{\mathrm{eff}}$ of the combination. (c) Show that $k_{\mathrm{eff}}$ is always smaller than the smaller of $k_1$ and $k_2$.

Question 3 of 5

An ideal spring of constant $250\,\mathrm{N/m}$ hangs from the ceiling with a $5.0\,\mathrm{kg}$ block at rest on its lower end. Use $g=10\,\mathrm{m/s^2}$. (a) Calculate the spring’s stretch. (b) The block is pulled down an additional $0.10\,\mathrm{m}$ and held. Calculate the magnitude and direction of the net force on the block at that position. (c) Calculate the block’s acceleration the instant it is released from that position.

Question 4 of 5

A $3.0\,\mathrm{kg}$ block on a frictionless $30^\circ$ incline is attached to an ideal spring of constant $150\,\mathrm{N/m}$ that runs parallel to the incline surface. Use $g=10\,\mathrm{m/s^2}$ and $\sin30^\circ=0.50$. (a) Calculate the spring’s stretch when the block sits at rest on the incline. (b) The block is pulled $0.040\,\mathrm{m}$ farther down the incline and held. Calculate the magnitude of the net force on it there. (c) State the direction of that net force and explain why the net force on the block always points toward the equilibrium position.

Question 5 of 5

A student must measure the spring constant of a spring using a meterstick, a stand, and a set of known masses. (a) Describe the measurements to take. (b) State what to plot so that a straight line yields $k$, and identify what the slope represents. (c) Explain one reason the best-fit line might not pass through the origin, and state whether that affects the value of $k$ obtained from the slope.