TOPIC 2.4 · STUDY
Newton's First Law
Newton's first law: zero net force means constant velocity. Forces balance axis by axis for cruising flight, elevators, hanging signs, and constant-speed ramps. An unbalanced force changes only that velocity component. Inertial frames coast at constant velocity; accelerating vehicles make free objects appear to slide.
2.4.A
Newton's First Law
Newton's first law says that if the net force on an object is zero, the velocity vector does not change. The object either stays at rest or moves in a straight line at constant speed. Take $g=9.8\,\mathrm{m/s^2}$ in this topic. Constant velocity is evidence that every force component along each axis is already balanced; motion itself does not require a leftover forward push.
A level airplane cruising in a straight line at steady speed is in equilibrium. Horizontally, thrust equals drag. Vertically, lift equals weight. The two pairs need not have the same magnitude as each other. A worker who pushes a crate steadily across a floor at constant speed also has zero net force: the push equals the opposing friction, and the normal force equals the weight when the push is horizontal.
A bathroom scale in an elevator reads the normal force. When the reading equals $mg$, the net vertical force is zero, so the acceleration is zero. That can mean the elevator is at rest or that it is moving at constant velocity either up or down. A reading larger than $mg$ means upward acceleration; a reading smaller than $mg$ means downward acceleration. The direction of travel is not the same thing as the direction of acceleration: slowing while going up produces the same downward acceleration as speeding up while going down.
| Scale reading | Net force | Acceleration |
|---|---|---|
| Equal to $mg$ | Zero | Zero (rest or constant $v$) |
| Greater than $mg$ | Upward | Upward |
| Less than $mg$ | Downward | Downward |
| Zero | Only weight remains | Free fall (downward at $g$) |
Example: a $55\,\mathrm{kg}$ rider has weight $(55)(9.8)=540\,\mathrm{N}$. A steady reading of $540\,\mathrm{N}$ while the car is moving means zero acceleration. A reading of $605\,\mathrm{N}$ gives $a=(605-540)/55=1.2\,\mathrm{m/s^2}$ upward. A reading of $485\,\mathrm{N}$ gives $a=(485-540)/55=-1.0\,\mathrm{m/s^2}$, which is $1.0\,\mathrm{m/s^2}$ downward.
Hanging objects at rest are equilibrium problems. For a sign supported by two identical cables that each make angle $\theta$ above the horizontal, the horizontal components cancel by symmetry and the vertical balance is $2T\sin\theta=W$, so $T=W/(2\sin\theta)$. As the cables flatten toward horizontal, $\sin\theta$ shrinks and $T$ grows large; perfectly horizontal cables cannot support a nonzero weight.
Two equal tensions and the weight meet at one point. Vertical equilibrium requires $2T\sin\theta=W$ when each cable makes angle $\theta$ above the horizontal.
Example: an $80\,\mathrm{N}$ sign hangs from two symmetric cables at $35^\circ$ above the horizontal. Then $T=80/(2\sin 35^\circ)=80/(2\times 0.574)=70\,\mathrm{N}$. If instead one cable is horizontal and the other is angled at $50^\circ$ above the horizontal, only the angled tension has a vertical component: $T_{\mathrm{ang}}\sin 50^\circ=W$ and the horizontal cable equals $T_{\mathrm{ang}}\cos 50^\circ$. For $W=120\,\mathrm{N}$, $T_{\mathrm{ang}}=120/\sin 50^\circ=157\,\mathrm{N}$ and the horizontal tension is $(157)\cos 50^\circ=101\,\mathrm{N}$.
A block that slides at constant speed down an incline is also in equilibrium. Along the ramp, friction up the surface equals $mg\sin\theta$. Perpendicular to the ramp, the normal force equals $mg\cos\theta$. For a $6.0\,\mathrm{kg}$ block on a $30^\circ$ ramp at constant speed, friction is $(6.0)(9.8)\sin 30^\circ=29\,\mathrm{N}$ and the normal force is $(6.0)(9.8)\cos 30^\circ=51\,\mathrm{N}$. If a rope instead pulls the same block up the ramp at constant speed while a friction force $f$ acts down the ramp, the tension must balance both $mg\sin\theta$ and $f$: $T=mg\sin\theta+f$.
Forces act independently by axis. If the net force is unbalanced on only one axis, only that component of velocity changes. The other component stays constant. A hockey puck sliding north on frictionless ice keeps its northward velocity while an eastward wind builds an eastward component, so the path curves. Instantaneous velocity can point east while the net force points north; the force changes the velocity, it does not have to line up with the current velocity.
Inertial frames move at constant velocity relative to each other. Inside a van that brakes, or a train that speeds up, a ball with no horizontal force continues at constant ground velocity. Relative to the accelerating vehicle the ball appears to roll forward when the van slows or backward when the train speeds up. A water surface that stays tilted, or a plumb bob that hangs at a steady angle from vertical, means the vehicle is accelerating, not coasting. In the ground frame those objects share the vehicle's acceleration because other forces supply the needed horizontal net force; do not invent a full set of fictitious forces for the vehicle frame.
Key points
- Zero net force means the velocity vector is constant: rest or straight-line constant speed.
- Constant velocity requires force balance on each axis separately; motion does not need a surplus forward force.
- Scale reading $=mg$ means $a=0$; a different reading means acceleration, not the travel direction by itself.
- Symmetric cables: $2T\sin\theta=W$. Near-horizontal cables need very large tension.
- Constant-speed incline: $f=mg\sin\theta$ and $F_N=mg\cos\theta$; a rope up the ramp at constant speed balances both gravity's component and friction.
- An unbalanced force changes only that velocity component; the other component stays constant.
- Inertial frames coast at constant velocity; a tilted plumb bob or water surface signals acceleration.
Constant velocity means zero net force, even when the speed is large. A fast cruising airplane and a parked crate can both have $\sum\vec F=\vec 0$.