TOPIC 2.5 · STUDY
Newton's Second Law
Newton's second law: add forces as vectors first, then a = F_net / m. Systems on ramps, Atwood and modified Atwood, contacting blocks, angled ropes, v-t slopes, elevators, and hanging stacks, using g = 9.8 m/s^2.
2.5.A
Newton's second law
Newton's second law says the acceleration of an object equals the net force on it divided by its mass: $\vec{a}=\vec{F}_{\mathrm{net}}/m$. Always form the vector sum of the forces first. Do not add the magnitudes of opposing forces. Choose a positive direction, write each force with a signed component on that axis, then divide the resulting $F_{\mathrm{net}}$ by $m$. This course uses $g=9.8\,\mathrm{m/s^2}$ near Earth.
Example: a $4.0\,\mathrm{kg}$ cart on a frictionless track is pushed east with $14\,\mathrm{N}$ and pulled west with $6.0\,\mathrm{N}$. Taking east as positive, $F_{\mathrm{net}}=14-6.0=8.0\,\mathrm{N}$, so $a=8.0/4.0=2.0\,\mathrm{m/s^2}$ east. Adding the force magnitudes to get $20\,\mathrm{N}$ would be wrong.
Because $a=F_{\mathrm{net}}/m$, scaling matters separately in the numerator and the denominator. If the net force doubles while the mass triples, the new acceleration is $(2/3)$ of the old value. Ranking accelerations means computing $F_{\mathrm{net}}/m$ for each object, not ranking by force alone or by mass alone.
On a frictionless incline of angle $\theta$, the unbalanced force along the surface is $mg\sin\theta$. Dividing by $m$ gives $a=g\sin\theta$, the same for every mass. The heavier object feels a larger parallel force, but it also has proportionally more inertia, so the mass cancels. At $\theta=25^\circ$, $a=(9.8)\sin 25^\circ\approx 4.1\,\mathrm{m/s^2}$. As $\theta\to 0$, $a\to 0$; as $\theta\to 90^\circ$, $a\to g$.
For two hanging masses $m_1$ and $m_2$ joined by a light string over a light frictionless pulley (an Atwood machine), treat the pair as one system along the string path. The unbalanced external force is $(m_2-m_1)g$ when $m_2>m_1$, and the inertia being accelerated is $m_1+m_2$, so $a=(m_2-m_1)g/(m_1+m_2)$. For $m_1=2.5\,\mathrm{kg}$ and $m_2=5.5\,\mathrm{kg}$, $a=(3.0)(9.8)/8.0=3.7\,\mathrm{m/s^2}$. The tension follows from either free-body equation once $a$ is known.
In a modified Atwood setup, a block of mass $m_1$ on a frictionless table is tied to a hanging block of mass $m_2$. The unbalanced force is only the hanging weight $m_2 g$, while both masses accelerate, so $a=m_2 g/(m_1+m_2)$. For the table block, $T=m_1 a$. With $m_1=3.0\,\mathrm{kg}$ and $m_2=2.0\,\mathrm{kg}$, $a=(2.0)(9.8)/5.0=3.9\,\mathrm{m/s^2}$ and $T=(3.0)(3.9)=12\,\mathrm{N}$.
A light string accelerates only the mass on the far side of it. If several blocks are linked and a force pulls the lead block, the tension in a given string equals (mass of everything trailing that string) times the common acceleration. Which block is trailing therefore changes the tension even when the total mass and applied force stay the same.
When two blocks in contact are pushed by a single horizontal force $F$ on a frictionless surface, they share one acceleration $a=F/(m_1+m_2)$. The contact force on the front block is whatever is needed to give that block alone the same $a$: $F_{\mathrm{c}}=m_{\mathrm{front}}a$. If $F=21\,\mathrm{N}$ pushes a $1.0\,\mathrm{kg}$ rear block against a $2.0\,\mathrm{kg}$ front block, then $a=21/3.0=7.0\,\mathrm{m/s^2}$ and $F_{\mathrm{c}}=(2.0)(7.0)=14\,\mathrm{N}$.
A rope that pulls at an angle $\theta$ above the horizontal has components $F\cos\theta$ (horizontal) and $F\sin\theta$ (vertical). If the box stays on a frictionless floor, the vertical component is balanced by the normal force, and only $F\cos\theta$ accelerates the box. Pulling a $5.0\,\mathrm{kg}$ box with $16\,\mathrm{N}$ at $40^\circ$ gives $a=(16\cos 40^\circ)/5.0\approx 2.5\,\mathrm{m/s^2}$. Using the full tension as if it were horizontal overstates $a$.
| Setup | Acceleration | Useful internal force |
|---|---|---|
| Frictionless incline | $a=g\sin\theta$ | Normal force has no along-ramp component |
| Atwood ($m_2>m_1$) | $a=(m_2-m_1)g/(m_1+m_2)$ | $T=m_1(g+a)$ on the rising side |
| Table $m_1$, hanging $m_2$ | $a=m_2 g/(m_1+m_2)$ | $T=m_1 a$ |
| Two blocks pushed in contact | $a=F/(m_1+m_2)$ | $F_{\mathrm{c}}=m_{\mathrm{front}}a$ |
| Angled pull, box on floor | $a=(F\cos\theta)/m$ | Vertical part of $F$ does not accelerate |
On a velocity-time graph, the slope of a segment is the acceleration. Net force equals mass times that slope: $F_{\mathrm{net}}=m\,(\Delta v/\Delta t)$. A flat velocity segment means zero acceleration and therefore zero net force, even if the speed is large. The figure below has three straight segments: rising, flat, then falling.
The slope of each $v(t)$ segment times the mass is the net force. The flat middle segment has zero slope, so the net force is zero there even though the speed is largest.
For a $1.5\,\mathrm{kg}$ object following the graph above, the slopes are $+2.0\,\mathrm{m/s^2}$, $0$, and $-2.0\,\mathrm{m/s^2}$. The corresponding net forces are $+3.0\,\mathrm{N}$, $0$, and $-3.0\,\mathrm{N}$. The largest speed sits in the zero-force interval.
In an elevator, take up as positive. The second law on a rider of mass $m$ is $N-mg=ma$, so the scale reading is $N=m(g+a)$. When $a$ is upward, the scale reads more than the true weight; when $a$ is downward, it reads less. A $70\,\mathrm{kg}$ rider accelerating upward at $1.4\,\mathrm{m/s^2}$ produces $N=(70)(9.8+1.4)=780\,\mathrm{N}$. Upward acceleration does not require upward velocity: the elevator could be moving down while slowing.
A block shoved up a rough incline has a larger acceleration magnitude on the way up than on the way down. Kinetic friction always opposes the velocity, so it reverses when the block reverses: going up, friction joins the parallel weight component; coming down, friction opposes it. Use this only as a second-law sign reminder; the friction model itself belongs to topic 2.7.
When stacked blocks hang from vertical strings and the whole chain accelerates upward, cut at any string and apply the second law to everything hanging below that cut. The tension equals the weight of that lower mass plus $ma$: $T=m_{\mathrm{below}}(g+a)$. For a $4.0\,\mathrm{kg}$ lowest block hauled upward at $1.5\,\mathrm{m/s^2}$, $T=(4.0)(9.8+1.5)=45\,\mathrm{N}$. Using the total chain mass instead of the mass below the cut is a common error.
Key points
- Add forces as vectors first, then divide by $m$; opposing magnitudes do not add.
- If $F_{\mathrm{net}}$ doubles and $m$ triples, $a$ is multiplied by $2/3$.
- On a frictionless incline, $a=g\sin\theta$ for every mass.
- Atwood: $a=(m_2-m_1)g/(m_1+m_2)$. Modified Atwood: $a=m_2 g/(m_1+m_2)$ and $T=m_1 a$.
- A string accelerates only the trailing mass; tension depends on which block trails.
- Contact force on a front block is $m_{\mathrm{front}}a$ with $a=F/(m_1+m_2)$.
- An angled rope accelerates a floor-bound box with $F\cos\theta$ only.
- Net force is $m$ times the $v(t)$ slope; a flat segment means zero net force.
- Elevator scale: $N=m(g+a)$ with up positive.
- Upward-hauling tension holds weight plus $ma$ of everything below the cut.
Find the vector sum of the forces before dividing by mass.