The First Law of Thermodynamics MCQ Practice

Question 1 of 10

A sealed container holds $n=2.00\,\mathrm{mol}$ of an ideal monatomic gas at temperature $T=300\,\mathrm{K}$. Use $R=8.31\,\mathrm{J/(mol\cdot K)}$. What is the internal energy of the gas?

  1. A. $2.49\times 10^{3}\,\mathrm{J}$
  2. B. $4.99\times 10^{3}\,\mathrm{J}$
  3. C. $7.48\times 10^{3}\,\mathrm{J}$
  4. D. $1.25\times 10^{4}\,\mathrm{J}$

Question 2 of 10

In the ideal-gas model used in AP Physics 2, which statement about internal energy is correct?

  1. A. The atoms do not interact by conservative forces and internal structure is ignored, so the gas has no internal potential energy.
  2. B. The gas stores internal potential energy equal to $\tfrac12 nRT$ from intermolecular springs.
  3. C. Internal energy includes gravitational potential energy of the container.
  4. D. Internal energy is only the kinetic energy of the center of mass of the sample.

Question 3 of 10

A closed cylinder of monatomic ideal gas sits at rest on a lab table. Energy is transferred to the gas by heating until its temperature rises, but the cylinder does not slide or lift. Which claim is best justified?

  1. A. The center-of-mass kinetic energy must increase because internal energy increased.
  2. B. The center of mass must accelerate upward because pressure increased.
  3. C. The increase in internal energy can raise the average microscopic kinetic energy of the atoms without changing the motion of the system's center of mass.
  4. D. Heating cannot change internal energy unless the cylinder's center of mass moves.

Question 4 of 10

Two samples of ideal monatomic gas are compared. Sample P has $N=2.0\times 10^{23}$ atoms at $400\,\mathrm{K}$. Sample Q has $N=4.0\times 10^{23}$ atoms at $200\,\mathrm{K}$. Use $k_B=1.38\times 10^{-23}\,\mathrm{J/K}$. What is $U_P/U_Q$?

  1. A. $1/2$
  2. B. $1$
  3. C. $2$
  4. D. $4$

Question 5 of 10

A fixed amount of ideal gas is heated in a rigid sealed container so that its temperature rises. During the process, energy $Q=+2.40\times 10^{3}\,\mathrm{J}$ is transferred to the gas by heating. Using $\Delta U=Q+W$ with $W$ the work done on the gas, which statement is correct?

  1. A. $W=+2.40\times 10^{3}\,\mathrm{J}$ and $\Delta U=0$
  2. B. $W=0$ and $\Delta U=+2.40\times 10^{3}\,\mathrm{J}$
  3. C. $W=-2.40\times 10^{3}\,\mathrm{J}$ and $\Delta U=0$
  4. D. $W=+2.40\times 10^{3}\,\mathrm{J}$ and $\Delta U=+4.80\times 10^{3}\,\mathrm{J}$

Question 6 of 10

An ideal gas expands isothermally. The absolute value of the work done on the gas equals $3.60\times 10^{3}\,\mathrm{J}$. Using $\Delta U=Q+W$, which set of values is correct?

  1. A. $\Delta U=0$, $W=-3.60\times 10^{3}\,\mathrm{J}$, $Q=+3.60\times 10^{3}\,\mathrm{J}$
  2. B. $\Delta U=0$, $W=+3.60\times 10^{3}\,\mathrm{J}$, $Q=-3.60\times 10^{3}\,\mathrm{J}$
  3. C. $\Delta U=+3.60\times 10^{3}\,\mathrm{J}$, $W=0$, $Q=+3.60\times 10^{3}\,\mathrm{J}$
  4. D. $\Delta U=-3.60\times 10^{3}\,\mathrm{J}$, $W=-3.60\times 10^{3}\,\mathrm{J}$, $Q=0$

Question 7 of 10

A sample of ideal monatomic gas expands isobarically at constant external pressure $P=1.00\times 10^{5}\,\mathrm{Pa}$. The volume increases by $\Delta V=+0.0300\,\mathrm{m}^{3}$. Using $W=-P\Delta V$ and $U=\tfrac32 nRT$ (so $\Delta U=\tfrac32 P\Delta V$ for this monatomic isobaric change), what is $Q$?

  1. A. $+3.00\times 10^{3}\,\mathrm{J}$
  2. B. $+4.50\times 10^{3}\,\mathrm{J}$
  3. C. $+7.50\times 10^{3}\,\mathrm{J}$
  4. D. $-4.50\times 10^{3}\,\mathrm{J}$

Question 8 of 10

A thermally insulated cylinder allows no energy transfer by heating. A piston quickly compresses the ideal gas inside. Which statement is correct for the gas during the compression?

  1. A. $Q>0$ and $\Delta U=0$
  2. B. $Q=0$ and $\Delta U=0$ because insulation prevents any energy change
  3. C. $Q=0$, $W<0$, and $\Delta U<0$
  4. D. $Q=0$, $W>0$, and $\Delta U>0$

Question 9 of 10

The $P$โ€“$V$ diagram shows a process for an ideal gas: an isobaric expansion from point A $(0.010\,\mathrm{m}^{3},\,4.0\times 10^{5}\,\mathrm{Pa})$ to point B $(0.030\,\mathrm{m}^{3},\,4.0\times 10^{5}\,\mathrm{Pa})$, followed by an isochoric pressure decrease to point C $(0.030\,\mathrm{m}^{3},\,1.0\times 10^{5}\,\mathrm{Pa})$. What is the work $W$ done on the gas for the entire path?

PV path: horizontal expansion then vertical pressure drop.
  1. A. $-8.0\times 10^{3}\,\mathrm{J}$
  2. B. $0$
  3. C. $+8.0\times 10^{3}\,\mathrm{J}$
  4. D. $-1.2\times 10^{4}\,\mathrm{J}$

Question 10 of 10

Two reversible compressions of the same ideal gas start at the same point on a $P$โ€“$V$ diagram and end at the same smaller volume. Path 1 is isothermal. Path 2 is adiabatic; the stem states that the adiabatic curve through the starting point is steeper than the isotherm. Which comparison of work done on the gas is correct?

  1. A. $|W|$ is larger on the isotherm because its curve stays higher.
  2. B. $W$ is zero on both paths because volume decreases the same amount.
  3. C. The adiabatic compression has the larger positive $W$ because its path stays above the isotherm, enclosing more area under the curve.
  4. D. The isothermal compression has $\Delta U>0$ while the adiabatic has $\Delta U=0$.