Resistance, Resistivity, and Ohm's Law MCQ Practice

Question 1 of 10

A uniform wire has resistivity $\rho=1.5\times 10^{-7}\,\Omega\cdot\mathrm{m}$, length $L=2.0\,\mathrm{m}$, and cross-sectional area $A=3.0\times 10^{-7}\,\mathrm{m}^{2}$. Its resistance is

  1. A. $0.50\,\Omega$
  2. B. $1.0\,\Omega$
  3. C. $2.0\,\Omega$
  4. D. $4.0\,\Omega$

Question 2 of 10

Wire 1 and wire 2 are the same metal. Wire 2 has twice the length and twice the diameter of wire 1. The ratio $R_2/R_1$ is

  1. A. $1/2$
  2. B. $1$
  3. C. $2$
  4. D. $4$

Question 3 of 10

Two wires have equal length and equal area. Wire P has resistivity twice that of wire Q. Which claim is correct?

  1. A. $R_P=2R_Q$
  2. B. $R_P=R_Q/2$
  3. C. $R_P=4R_Q$
  4. D. Resistivity does not affect resistance.

Question 4 of 10

A metal wire’s temperature increases while its geometry is fixed. For a typical conductor, which statement is best?

  1. A. Resistivity decreases, so resistance decreases.
  2. B. Resistivity increases, so resistance increases.
  3. C. Resistivity is unchanged for all metals.
  4. D. Resistance depends only on current, not temperature.

Question 5 of 10

A rod has $\rho=4.0\times 10^{-8}\,\Omega\cdot\mathrm{m}$ and $R=0.020\,\Omega$. If $L=0.50\,\mathrm{m}$, the cross-sectional area is

  1. A. $1.0\times 10^{-6}\,\mathrm{m}^{2}$
  2. B. $1.0\times 10^{-5}\,\mathrm{m}^{2}$
  3. C. $1.0\times 10^{-4}\,\mathrm{m}^{2}$
  4. D. $2.0\times 10^{-6}\,\mathrm{m}^{2}$

Question 6 of 10

An ohmic resistor has $R=25\,\Omega$. When the potential difference across it is $5.0\,\mathrm{V}$, the current is

  1. A. $0.20\,\mathrm{A}$
  2. B. $5.0\,\mathrm{A}$
  3. C. $125\,\mathrm{A}$
  4. D. $0.040\,\mathrm{A}$

Question 7 of 10

The graph shows current versus potential difference for an ohmic resistor. The resistance is closest to

I versus ΔV for an ohmic resistor through (0,0) and (10 V, 2 A).
  1. A. $0.20\,\Omega$
  2. B. $2.0\,\Omega$
  3. C. $5.0\,\Omega$
  4. D. $20\,\Omega$

Question 8 of 10

A material is ohmic. Which property is required by that classification in the CED sense used here?

  1. A. Resistance is constant for all currents (linear $I$–$\Delta V$).
  2. B. Resistance doubles every time current doubles.
  3. C. Resistivity must decrease with temperature.
  4. D. The element cannot dissipate thermal energy.

Question 9 of 10

An ohmic element carries $0.40\,\mathrm{A}$ when $\Delta V=12\,\mathrm{V}$. If $\Delta V$ becomes $18\,\mathrm{V}$, the new current is

  1. A. $0.27\,\mathrm{A}$
  2. B. $0.40\,\mathrm{A}$
  3. C. $0.60\,\mathrm{A}$
  4. D. $1.2\,\mathrm{A}$

Question 10 of 10

The table gives $\Delta V$ and $I$ for a circuit element. Which conclusion is best?

Trial $\Delta V$ (V) $I$ (A)
1 2.0 0.10
2 4.0 0.20
3 6.0 0.30
  1. A. Non-ohmic: $R$ changes by a factor of 3.
  2. B. Ohmic with $R=20\,\Omega$.
  3. C. Ohmic with $R=0.050\,\Omega$.
  4. D. Current is independent of $\Delta V$.