Resistance, Resistivity, and Ohm's Law FRQ Practice

Responses receive AI feedback against a rubric after submission. Scores are practice estimates.

Question 1 of 5

A ribbon conductor has $\rho=5.0\times 10^{-7}\,\Omega\cdot\mathrm{m}$, width $2.0\,\mathrm{mm}$, thickness $0.50\,\mathrm{mm}$, and length $0.80\,\mathrm{m}$. (a) Find $A$. (b) Find $R$. (c) If thickness is doubled at fixed width and length, find the new $R$.

Question 2 of 5

Starting from $R=\rho L/A$, (a) show the factor by which $R$ changes if $L$ is halved and $A$ is reduced by a factor of 4. (b) State whether resistivity is a geometry or material property. (c) Explain why two wires of equal $R$ need not have equal $\rho$.

Question 3 of 5

An ohmic lamp filament is modeled with $R=60\,\Omega$ at operating temperature. (a) Find $I$ at $120\,\mathrm{V}$. (b) Find the potential difference needed for $0.50\,\mathrm{A}$. (c) If a non-ohmic device had the same $I$ at $120\,\mathrm{V}$ but a different $I$ at $60\,\mathrm{V}$ than Ohm’s law predicts, explain what that implies.

Question 4 of 5

A linear $I$–$\Delta V$ graph for an ohmic resistor passes through $(0,0)$ and $(8.0\,\mathrm{V},\,0.20\,\mathrm{A})$. (a) Calculate $R$. (b) Calculate the slope of $I$ versus $\Delta V$. (c) Sketch qualitatively how the graph changes if $R$ increases.

Question 5 of 5

Using the trial table of $\Delta V$ and $I$ for an unknown element: Trial 1: $3.0\,\mathrm{V}$, $0.15\,\mathrm{A}$; Trial 2: $9.0\,\mathrm{V}$, $0.45\,\mathrm{A}$. (a) Compute $R$ in each trial. (b) Classify as ohmic or non-ohmic. (c) Predict $I$ at $6.0\,\mathrm{V}$ if ohmic.