Electric Power MCQ Practice

Question 1 of 10

A resistor carries $I=2.0\,\mathrm{A}$ with $\Delta V=12\,\mathrm{V}$ across it. The power dissipated is

  1. A. $6.0\,\mathrm{W}$
  2. B. $24\,\mathrm{W}$
  3. C. $48\,\mathrm{W}$
  4. D. $0.17\,\mathrm{W}$

Question 2 of 10

An ohmic heater has $R=20\,\Omega$ and $\Delta V=40\,\mathrm{V}$. Using $P=(\Delta V)^{2}/R$, the power is

  1. A. $20\,\mathrm{W}$
  2. B. $40\,\mathrm{W}$
  3. C. $80\,\mathrm{W}$
  4. D. $800\,\mathrm{W}$

Question 3 of 10

For a fixed resistance, if the current doubles, the power dissipated becomes

  1. A. half as large
  2. B. twice as large
  3. C. four times as large
  4. D. unchanged

Question 4 of 10

Bulbs A and B are identical and ohmic. Bulb A operates at twice the potential difference of bulb B. The ratio $P_A/P_B$ is

  1. A. $1/2$
  2. B. $1$
  3. C. $2$
  4. D. $4$

Question 5 of 10

Brightness of a bulb increases with

  1. A. the bulb's mass only
  2. B. the power dissipated in the bulb
  3. C. wire length only
  4. D. the number of open switches nearby

Question 6 of 10

A device draws $0.50\,\mathrm{A}$ at $9.0\,\mathrm{V}$ for $40\,\mathrm{s}$. The electrical energy transferred is

  1. A. $4.5\,\mathrm{J}$
  2. B. $180\,\mathrm{J}$
  3. C. $18\,\mathrm{J}$
  4. D. $720\,\mathrm{J}$

Question 7 of 10

The table lists operating conditions. Which device dissipates the most power?

Device $I$ (A) $\Delta V$ (V)
P 1.0 10
Q 2.0 6.0
R 0.50 30
  1. A. P
  2. B. Q
  3. C. R
  4. D. P and R tied

Question 8 of 10

An ohmic resistor dissipates $36\,\mathrm{W}$ when $I=3.0\,\mathrm{A}$. Its resistance is

  1. A. $3.0\,\Omega$
  2. B. $4.0\,\Omega$
  3. C. $12\,\Omega$
  4. D. $108\,\Omega$

Question 9 of 10

If $\Delta V$ across a fixed ohmic resistor is halved, the power becomes

  1. A. half
  2. B. one-fourth
  3. C. twice
  4. D. unchanged

Question 10 of 10

Two identical bulbs are compared. Bulb 1 dissipates twice the power of bulb 2. Which claim about brightness is best?

  1. A. Bulb 2 is brighter.
  2. B. Bulb 1 is brighter.
  3. C. Brightness is independent of power.
  4. D. They must be equally bright because they are identical models.