TOPIC 6.5 · STUDY

Rolling

Rolling without slipping links center speed to spin by v_cm = R omega, puts the contact point instantly at rest, and stores kinetic energy as (1/2) M v^2 (1+k). Down a ramp from rest, v = sqrt(2 g h / (1+k)). Ideal static friction at a stationary contact does no work.

6.5.A

Rolling

Rolling without slipping on a stationary surface means the rim does not slide where it touches. The center-of-mass speed and the spin are locked by $v_{\mathrm{cm}}=R\omega$. The sense of rotation matches the translation: a center moving right requires clockwise spin so that the bottom rim velocity relative to the center points left and cancels $v_{\mathrm{cm}}$. The contact point is then instantaneously at rest relative to the surface. Relative to the surface, the top rim point moves at $2v_{\mathrm{cm}}$ in the direction of the center.

Wheel on a floor: center velocity v to the right, top point 2v, contact point 0.

No-slip rolling to the right: the center moves at $v$, the top point at $2v$, and the contact point is instantaneously at rest ($0$).

Each full revolution advances the center by one circumference when there is no slip, so the arc length equals the path of the center: $\Delta s=R\,\Delta\theta$. Three revolutions move the center a distance $6\pi R$. Example: a wheel of radius $R=0.40\,\mathrm{m}$ rolls without slipping at $v_{\mathrm{cm}}=3.0\,\mathrm{m/s}$. Then $\omega=v_{\mathrm{cm}}/R=7.5\,\mathrm{rad/s}$. If the wheel is slipping, do not use $v_{\mathrm{cm}}=R\omega$. Slipping means the contact point moves relative to the surface, so translation and rotation are independent until friction forces them to match.

Total kinetic energy of a rigid roller is the sum of translational and rotational pieces about the center of mass: $K=\tfrac12 Mv_{\mathrm{cm}}^2+\tfrac12 I_{\mathrm{cm}}\omega^2$. With no slip, $\omega=v_{\mathrm{cm}}/R$. Writing $I_{\mathrm{cm}}=kMR^2$ then gives $K=\tfrac12 Mv^2(1+k)$, where $v$ means $v_{\mathrm{cm}}$. A solid cylinder or disk has $k=1/2$, so $K=\tfrac34 Mv^2$. A thin hoop has $k=1$, so $K=Mv^2$, and half of that total is rotational. A solid sphere has $k=2/5$, so $K=\tfrac{7}{10}Mv^2$.

Shape $k$ No-slip $K$ Speed after drop $h$ from rest
Solid cylinder or disk $1/2$ $\tfrac34 Mv^2$ $\sqrt{4gh/3}$
Thin hoop $1$ $Mv^2$ $\sqrt{gh}$
Solid sphere $2/5$ $\tfrac{7}{10}Mv^2$ $\sqrt{10gh/7}$

Down a fixed ramp from rest with no dissipation, lost gravitational energy becomes the rolling kinetic energy: $Mgh=K=\tfrac12 Mv^2(1+k)$, so $v=\sqrt{2gh/(1+k)}$. Mass and radius cancel for objects that share the same shape factor $k$. A solid cylinder gives $v=\sqrt{4gh/3}$; a solid sphere gives $v=\sqrt{10gh/7}$. Numerical check with $g=10\,\mathrm{m/s^2}$: a solid cylinder that drops $h=1.2\,\mathrm{m}$ reaches $v=\sqrt{4(10)(1.2)/3}=\sqrt{16}=4.0\,\mathrm{m/s}$.

Ideal static friction for no-slip rolling does no work, because the contact point is instantaneously at rest relative to the surface. That friction can still provide the torque that keeps $\omega$ matched to $v_{\mathrm{cm}}/R$ on a ramp. On level ground at constant speed with no resistance, the required torque is zero, so the static friction force can be zero.

If the object is sliding, kinetic friction does negative work and mechanical energy decreases. A ball launched rightward with no spin has a contact that slides forward, so friction points left: it slows the center and torques the ball up (clockwise) until $v_{\mathrm{cm}}=R\omega$. A spinning wheel set down with its center at rest has a bottom point that slides backward, so friction points forward: the center speeds up while the spin slows until the same no-slip match is reached.

Rolling up a ramp without slipping until it stops converts both translational and rotational kinetic energy into gravitational potential energy. When $v_{\mathrm{cm}}$ reaches zero, $\omega$ is also zero under the no-slip link, so no leftover spin energy remains.

Key points

  • No slip on a stationary surface: $v_{\mathrm{cm}}=R\omega$, rotation sense matches translation, and the contact point is instantaneously at rest.
  • Relative to the surface, the top point moves at $2v_{\mathrm{cm}}$; $n$ revolutions advance the center by $2\pi nR$ (three revolutions give $6\pi R$).
  • If the contact point moves relative to the surface, the wheel is slipping; do not force $v=R\omega$.
  • Total kinetic energy is $K=\tfrac12 Mv^2+\tfrac12 I_{\mathrm{cm}}\omega^2$; with no slip and $I_{\mathrm{cm}}=kMR^2$, $K=\tfrac12 Mv^2(1+k)$.
  • Shape factors: disk $k=1/2$ ($K=\tfrac34 Mv^2$), hoop $k=1$ ($K=Mv^2$, half rotational), sphere $k=2/5$ ($K=\tfrac{7}{10}Mv^2$).
  • Ramp from rest, no loss: $v=\sqrt{2gh/(1+k)}$; cylinder $\sqrt{4gh/3}$, sphere $\sqrt{10gh/7}$; $M$ and $R$ cancel for fixed $k$.
  • Ideal static friction at a resting contact does no work but can supply the matching torque; on level constant-speed rolling it may be zero.
  • During slipping, kinetic friction removes mechanical energy while adjusting $v_{\mathrm{cm}}$ and $\omega$ toward $v_{\mathrm{cm}}=R\omega$.

Static friction in ideal no-slip rolling does not remove mechanical energy, because the contact point is instantaneously at rest.

Practice this topic