TOPIC 6.4 · STUDY

Conservation of Angular Momentum

When net external torque about a chosen axis is zero, angular momentum about that axis stays constant. System choice decides which torques are external. Changing rotational inertia at fixed L changes angular speed and kinetic energy.

6.4.A

Conservation of angular momentum

If the net external torque about a chosen axis is zero for the selected system, the angular momentum of that system about that axis is constant. Internal torques cancel in pairs by Newton's third law, so they do not change the system total. A force applied at the pivot has zero lever arm about that pivot and contributes zero torque about that axis.

System choice decides which torques count as external. Two disks that rub while spinning about a shared axle exchange angular momentum: each disk's $L$ changes, but the pair's total $L$ stays constant if the axle torque from the supports is zero. A brake fixed to the room exerts an external torque on a rotor-only system, so that rotor's $L$ changes. Include Earth and the brake with the rotor if you want those contact torques to be internal and the total angular momentum conserved.

Two coaxial disks drawn as side-by-side circles labeled I and 2I. A short curved arrow labeled w sits above the left disk only.

Coaxial disks with inertias $I$ and $2I$. Only the left disk is spinning initially, as the curved arrow labeled $w$ shows.

Angular momentum about the axis is $L=I\omega$ for a rigid rotor. If $I$ decreases while external torque stays negligible, $\omega$ increases so that $L$ stays fixed. Example: $I$ falls from $4.0$ to $2.0\,\mathrm{kg\,m^2}$ with initial $\omega=3.0\,\mathrm{rad/s}$. Conservation gives $(4.0)(3.0)=(2.0)\omega_f$, so $\omega_f=6.0\,\mathrm{rad/s}$.

Pulling masses inward on a spinning platform lowers $I$ at fixed $L$. Rotational kinetic energy $K=L^2/(2I)$ therefore rises when $I$ drops. The person doing the pull does positive work; that energy comes from internal (muscular) energy, not from an external torque about the vertical axis. Moving the same masses outward raises $I$, lowers $\omega$, and lowers $K$ at the same fixed $L$.

Two coaxial disks that reach a common angular speed conserve total $L$ when external axle torque is negligible, then $\omega_f=L_{\mathrm{total}}/I_{\mathrm{total}}$. Example: disk $I$ at $+3\omega$ and disk $2I$ at $-\omega$ give $L_{\mathrm{total}}=I(3\omega)+2I(-\omega)=I\omega$ and $I_{\mathrm{total}}=3I$, so $\omega_f=\omega/3$. Kinetic energy drops; friction between the disks converts the difference into internal energy. Two opposite equal disks ($I$ at $+\omega$ and $I$ at $-\omega$) have $L_{\mathrm{total}}=0$ and end at rest.

A lump that drops vertically onto a spinning platform brings zero angular momentum about the vertical axle but adds inertia. The platform slows so that $L$ of the combined system stays the same when external torque about that axle is negligible. A central force along the line to a reference point changes linear momentum but not angular momentum about that point.

Zero net external angular impulse means the endpoint angular momenta match: $L_f=L_i$ about the chosen axis. Angular momentum can still change in the middle of a process if external impulses arrive one after another and temporarily leave a nonzero net; only the net impulse from start to finish has to vanish for the endpoints to agree.

Situation Conserved quantity What changes
Net external torque about axis is zero System $L$ about that axis Individual piece $L$ values may trade
$I$ drops at fixed $L$ $L=I\omega$ $\omega$ and $K=L^2/(2I)$ rise
$I$ rises at fixed $L$ $L=I\omega$ $\omega$ and $K$ fall
Coaxial disks to common $\omega$ $L_{\mathrm{total}}$ $K$ usually drops to internal energy
Vertical drop onto spinning platform System $L$ about the axle $I$ up, $\omega$ down
Central force toward reference point $L$ about that point Linear momentum can change

Key points

  • Zero net external torque about a chosen axis keeps system $L$ about that axis constant; internal torques cancel in pairs.
  • A force at the pivot has zero lever arm about that pivot.
  • System choice matters: rubbing disks conserve pair $L$ if axle torque is zero; a room-fixed brake is external to a rotor-only system.
  • At fixed $L$, smaller $I$ means larger $\omega$; $I$ from $4.0$ to $2.0\,\mathrm{kg\,m^2}$ at $3.0\,\mathrm{rad/s}$ ends at $6.0\,\mathrm{rad/s}$.
  • $K=L^2/(2I)$ rises when $I$ falls at fixed $L$; the work comes from internal energy, not external torque.
  • Coaxial disks: $\omega_f=L_{\mathrm{total}}/I_{\mathrm{total}}$; $I$ at $+3\omega$ and $2I$ at $-\omega$ give $\omega_f=\omega/3$, with $K$ dropping to internal energy.
  • A vertical lump adds $I$ but no axle $L$, so the platform slows at conserved system $L$; a central force does not change $L$ about that point.
  • Zero net external angular impulse matches endpoint $L$ values; $L$ may still vary mid-process if impulses are staggered.

Constant angular momentum does not mean constant kinetic energy when inertia changes.

Practice this topic