TOPIC 5.4 · STUDY

Rotational Inertia

Rotational inertia depends on mass and perpendicular distance from a chosen axis. Point masses use I = m r^2, rigid bodies sum those pieces, and the parallel-axis theorem shifts I for parallel axes. Equal total mass does not mean equal I; common shapes use given formulas.

5.4.A

Rotational inertia

Rotational inertia $I$ measures how hard it is to change an object's angular velocity about a chosen axis. For a single point mass $m$ at perpendicular distance $r$ from that axis, $$I=m r^2.$$ The SI unit is $\mathrm{kg\,m^2}$. Only the perpendicular distance to the axis enters; where the mass sits around the circle at that radius does not change $I$.

Because $I$ scales with $r^2$, doubling $r$ at fixed mass multiplies $I$ by $4$. Changing both mass and radius compounds. Example: a point mass $m=1.5\,\mathrm{kg}$ at $r=0.40\,\mathrm{m}$ has $I=(1.5)(0.40)^2=0.24\,\mathrm{kg\,m^2}$. Doubling $r$ to $0.80\,\mathrm{m}$ gives $I=0.96\,\mathrm{kg\,m^2}$, four times as large. Doubling the mass to $3.0\,\mathrm{kg}$ and halving $r$ to $0.20\,\mathrm{m}$ gives $I=(3.0)(0.20)^2=0.12\,\mathrm{kg\,m^2}$, half the original value.

A rigid body is treated as many point masses. Its rotational inertia about an axis is the sum of every $m r^2$ contribution. Mass that sits on the axis has $r=0$ and contributes zero. Angular separation around the axis does not matter; only each piece's perpendicular distance does. Spreading the same bits of mass farther from the axis raises $I$.

Equal total mass does not mean equal rotational inertia. Two point masses $m$ fixed at radius $r$ from an axis give $$I=2 m r^2.$$ Two point masses $2m$ fixed at radius $r/2$ give $$I=2(2m)\left(\frac{r}{2}\right)^2=m r^2,$$ half as much, even though the total mass $4m$ is larger than $2m$. Concrete numbers: $m=0.50\,\mathrm{kg}$ and $r=0.40\,\mathrm{m}$ yield $I=2(0.50)(0.40)^2=0.16\,\mathrm{kg\,m^2}$ for the first layout. The second layout uses two $1.0\,\mathrm{kg}$ masses at $0.20\,\mathrm{m}$ and yields $I=2(1.0)(0.20)^2=0.08\,\mathrm{kg\,m^2}$.

The parallel-axis theorem relates rotational inertia about any axis parallel to an axis through the center of mass: $$I=I_{\mathrm{cm}}+M d^2,$$ where $M$ is the total mass and $d$ is the perpendicular distance between the two parallel axes. The formula applies only for a parallel axis. Among all parallel axes, the smallest $I$ is the one through the center of mass ($d=0$). Offsets $+d$ and $-d$ give the same $I$ because $d^2$ is the same. Example: $I_{\mathrm{cm}}=0.40\,\mathrm{kg\,m^2}$, $M=3.0\,\mathrm{kg}$, and $d=0.20\,\mathrm{m}$ give $$I=0.40+(3.0)(0.20)^2=0.40+0.12=0.52\,\mathrm{kg\,m^2}.$$

Use the following standard formulas as given; do not derive them here. A thin hoop or hollow cylinder about its central axis has $I=MR^2$. A uniform disk or solid cylinder about its central axis has $I=\tfrac12 MR^2$. A uniform thin rod about a perpendicular axis through its center has $I=ML^2/12$; about a parallel axis through one end, $I=ML^2/3$. Shifting a disk to a parallel axis tangent to the rim uses the parallel-axis theorem with $d=R$: $$I=\tfrac12 MR^2+MR^2=\tfrac32 MR^2.$$ When you move from the center of a rod to an end, the offset is $d=L/2$, not the full length $L$.

Object and axis Rotational inertia
Point mass at distance $r$ $I=m r^2$
Thin hoop / hollow cylinder, central axis $I=MR^2$
Uniform disk / solid cylinder, central axis $I=\tfrac12 MR^2$
Uniform thin rod, center, perpendicular $I=ML^2/12$
Uniform thin rod, one end, parallel $I=ML^2/3$
Disk, parallel axis tangent to rim $I=\tfrac32 MR^2$
Any body, parallel axis $I=I_{\mathrm{cm}}+M d^2$

A graph of $I$ versus $d^2$ for parallel axes is a straight line with slope $M$ and vertical intercept $I_{\mathrm{cm}}$. A graph of $I$ versus $r$ for one point mass is a parabola; versus $r^2$ it is a line of slope $m$. The figure below uses $I=0.20+4 d^2$ in SI units, so $I_{\mathrm{cm}}=0.20\,\mathrm{kg\,m^2}$ and $M=4.0\,\mathrm{kg}$.

Straight line of rotational inertia versus squared parallel-axis offset with slope 4 and intercept 0.20.

For $I=0.20+4 d^2$, the intercept is $I_{\mathrm{cm}}=0.20\,\mathrm{kg\,m^2}$ and the slope is $M=4.0\,\mathrm{kg}$. At $d^2=0.04\,\mathrm{m^2}$, $I=0.36\,\mathrm{kg\,m^2}$.

Key points

  • Point mass: $I=m r^2$ in $\mathrm{kg\,m^2}$; doubling $r$ multiplies $I$ by $4$.
  • A rigid body is the sum of $m r^2$; mass on the axis contributes zero.
  • Only perpendicular distance matters; angular placement around the axis does not.
  • Equal total mass need not mean equal $I$; mass farther out raises $I$ more.
  • Parallel-axis theorem: $I=I_{\mathrm{cm}}+M d^2$ for a parallel axis only; smallest $I$ is at the CM.
  • Offsets $+d$ and $-d$ give the same $I$; for a rod center to end, use $d=L/2$ not $L$.
  • Use given shape formulas: hoop $MR^2$, disk $\tfrac12 MR^2$, rod center $ML^2/12$, rod end $ML^2/3$.
  • Graph of $I$ versus $d^2$ is a line of slope $M$ and intercept $I_{\mathrm{cm}}$; $I$ versus $r$ for one mass is a parabola.

Mass farther from the axis matters more than the same mass near the axis, because rotational inertia depends on the square of the perpendicular distance.

Practice this topic