TOPIC 4.4 · STUDY

Elastic and Inelastic Collisions

Isolated collisions conserve system momentum whether elastic or inelastic. Elastic collisions keep total kinetic energy; inelastic collisions convert some kinetic energy to other forms. Perfectly inelastic collisions stick and share one final velocity, while separating objects may still be inelastic.

4.4.A

Elastic and inelastic collisions

Treat a collision as isolated when the external impulse during the brief contact is negligible. Then the total momentum of the system is the same just before and just after the interaction: $$\sum \vec{p}_{\mathrm{i}}=\sum \vec{p}_{\mathrm{f}}.$$ Momentum conservation holds for both elastic and inelastic collisions under that assumption. Conserving momentum alone does not tell you which kind of collision occurred.

An elastic collision keeps the total kinetic energy of the system the same when you compare the states before contact and after separation: $$K_{\mathrm{i}}=K_{\mathrm{f}}.$$ Individual objects can still gain or lose kinetic energy; only the sum must match. During maximum compression of a spring bumper between carts, kinetic energy can dip temporarily because energy is stored in the spring. That mid-collision dip does not by itself make the collision inelastic; classify using the before-and-after totals once the spring has returned its energy.

In an inelastic collision, the total kinetic energy decreases. The missing kinetic energy becomes internal energy, permanent deformation, thermal energy, or sound. Total energy is still conserved; kinetic energy is simply not the whole story. Kinetic energy cannot be negative: signs belong on momentum components, not on $K$.

A perfectly inelastic collision is the special inelastic case in which the objects stick and thereafter share one common velocity. Sticking is the defining observation, not merely that the objects touched. Objects can bounce apart and still be inelastic if some kinetic energy was converted; separating is not the same as elastic.

Equal masses in one dimension, with one object initially at rest, give a clean elastic result: the velocities swap. Cart A of mass $m$ at speed $v$ hits identical cart B at rest elastically; after separation A is at rest and B moves at $v$. Momentum $mv$ and kinetic energy $\tfrac12 m v^2$ are both preserved.

If those equal masses stick instead, momentum still gives a single final speed. With $m$ at $v$ hitting identical $m$ at rest, $$mv=(2m)V\quad\Rightarrow\quad V=\frac{v}{2}.$$ Initial kinetic energy is $\tfrac12 m v^2$; final kinetic energy is $\tfrac12(2m)(v/2)^2=\tfrac14 m v^2$, so $$\frac{K_{\mathrm{f}}}{K_{\mathrm{i}}}=\frac{1}{2}.$$ Half the kinetic energy is converted.

Unequal masses that stick lose more of the initial kinetic energy when the target is heavier. Mass $m$ at speed $v$ hits stationary mass $3m$ and they stick: $$mv=(4m)V\quad\Rightarrow\quad V=\frac{v}{4}.$$ Then $$\frac{K_{\mathrm{f}}}{K_{\mathrm{i}}}=\frac{\tfrac12(4m)(v/4)^2}{\tfrac12 m v^2}=\frac{1}{4}.$$ Only one-fourth of the initial kinetic energy remains.

Work the same idea with concrete numbers. A $1.0\,\mathrm{kg}$ cart at $6.0\,\mathrm{m/s}$ sticks to a $2.0\,\mathrm{kg}$ cart at rest: $$1.0\cdot 6.0=(1.0+2.0)V\quad\Rightarrow\quad V=2.0\,\mathrm{m/s}.$$ Initial kinetic energy is $K_{\mathrm{i}}=\tfrac12(1.0)(6.0)^2=18\,\mathrm{J}$. Final kinetic energy is $K_{\mathrm{f}}=\tfrac12(3.0)(2.0)^2=6.0\,\mathrm{J}$, so one-third of the initial kinetic energy remains and $12\,\mathrm{J}$ has been converted.

Identical carts approaching with equal-and-opposite velocities that stick end at rest. If each has mass $m$ and speed $u$, total momentum is $mu+(-mu)=0$ before and after, so the joined speed is zero. All of the initial kinetic energy $mu^2$ is converted. The center-of-mass velocity is unchanged in any isolated collision; for that equal-and-opposite pair, $v_{\mathrm{cm}}=0$ before and after, whether the bounce is elastic or not.

Repeated similar collisions that keep a fixed fraction of the kinetic energy plot as a straight line of $K_{\mathrm{f}}$ versus $K_{\mathrm{i}}$ through the origin. A slope of $0.75$ means each trial retains $75\%$ of the initial kinetic energy and converts $25\%$. A measured ratio $0.98\pm 0.05$ still includes $1$, so those data do not prove a kinetic-energy loss.

Straight line of final total kinetic energy versus initial total kinetic energy through the origin with slope 3/4.

The line $K_{\mathrm{f}}=0.75\,K_{\mathrm{i}}$ passes through $(4\,\mathrm{J},\,3\,\mathrm{J})$ and $(8\,\mathrm{J},\,6\,\mathrm{J})$. The same retained fraction appears in every trial.

After carts stick, a later rough patch is a separate interval. Friction on that patch delivers an external impulse, so do not apply momentum conservation across the stopping distance. Find the joined velocity from the sticking collision first, then analyze the rough patch with work-energy or Newton's laws using that joined speed as the start of the second stage.

Case What is conserved Kinetic energy
Isolated elastic Momentum and total $K$ $K_{\mathrm{f}}=K_{\mathrm{i}}$
Isolated inelastic Momentum; total energy $K_{\mathrm{f}}<K_{\mathrm{i}}$
Perfectly inelastic Momentum; objects stick Largest $K$ loss for given masses and initial velocities
Equal $m$, one at rest, elastic Momentum and total $K$ Velocities swap
Equal $m$, one at rest, stick Momentum; $V=v/2$ $K_{\mathrm{f}}/K_{\mathrm{i}}=1/2$
$m$ hits $3m$ at rest, stick Momentum; $V=v/4$ $K_{\mathrm{f}}/K_{\mathrm{i}}=1/4$

Key points

  • Negligible external impulse: system momentum is conserved in both elastic and inelastic collisions.
  • Elastic means total $K$ matches before contact and after separation; mid-collision spring storage is temporary.
  • Inelastic means total $K$ decreases; the difference becomes internal, thermal, deformation, or sound energy.
  • Perfectly inelastic means the objects stick and share one final velocity.
  • Equal masses, one at rest: elastic swaps velocities; sticking gives $V=v/2$ and $K_{\mathrm{f}}/K_{\mathrm{i}}=1/2$.
  • Sticking $m$ into $3m$ at rest: $V=v/4$ and $K_{\mathrm{f}}/K_{\mathrm{i}}=1/4$; example $1\,\mathrm{kg}$ at $6\,\mathrm{m/s}$ into $2\,\mathrm{kg}$ gives $V=2\,\mathrm{m/s}$, $18\,\mathrm{J}\to 6\,\mathrm{J}$.
  • A $K_{\mathrm{f}}$ versus $K_{\mathrm{i}}$ line of slope $0.75$ keeps $75\%$ of the kinetic energy each trial; $0.98\pm 0.05$ still includes $1$.
  • After sticking, a rough patch is a new interval with external friction impulse; do not conserve momentum across the stop.

Separating after contact is not the same as elastic; sticking is the perfectly inelastic case, not the only inelastic case.

Practice this topic