TOPIC 4.2 · STUDY

Change in Momentum and Impulse

Impulse equals average net force times duration and equals the change in momentum. Read impulse as signed area under an F-versus-t graph; net force is the slope of p-versus-t. Same momentum change in a longer contact time means a smaller average force.

4.2.A

Change in momentum and impulse

The impulse delivered by a net force over a time interval equals the change in momentum of the object: $\vec{J}=\vec{F}_{\mathrm{avg}}\Delta t=\Delta\vec{p}$. Units match: $1\,\mathrm{N\cdot s}=1\,\mathrm{kg\cdot m/s}$. For a force that is constant in both magnitude and direction, the impulse points the same way as the force. Near Earth, gravity is downward, so the impulse due to weight over time $\Delta t$ is downward with magnitude $mg\Delta t$. This course uses $g=10\,\mathrm{m/s^2}$ when a numerical $g$ is needed.

Example: a constant $18\,\mathrm{N}$ net force acts east on a cart for $0.40\,\mathrm{s}$. The impulse is $J=(18)(0.40)=7.2\,\mathrm{N\cdot s}$ east. If the cart mass is $3.0\,\mathrm{kg}$ and it started at rest, its final momentum is $7.2\,\mathrm{kg\cdot m/s}$ east and its final speed is $2.4\,\mathrm{m/s}$.

On a graph of net force versus time, impulse is the signed area under the curve. Areas above the time axis count positive; areas below count negative. Add those signed pieces to get the net impulse for the full interval. Equal areas mean equal momentum changes, even when the peak forces look very different.

Net force versus time forming a triangle from the origin up to 6 N at 3 s and back to zero at 6 s.

Triangular pulse from $t=0$ to $t=6\,\mathrm{s}$. The signed area is $\tfrac12(6)(6)=18\,\mathrm{N\cdot s}$, so the net impulse in this window is $+18\,\mathrm{N\cdot s}$.

Signed-area check with rectangles: suppose $F=+8\,\mathrm{N}$ from $0$ to $2\,\mathrm{s}$, then $F=-4\,\mathrm{N}$ from $2$ to $5\,\mathrm{s}$. The areas are $+16\,\mathrm{N\cdot s}$ and $-12\,\mathrm{N\cdot s}$, so the net impulse is $+4\,\mathrm{N\cdot s}$. A taller, shorter pulse with the same net area would change the momentum by the same amount.

Momentum versus time carries the same information differently. The slope of a $p$-versus-$t$ graph is the net force: $F_{\mathrm{net}}=\Delta p/\Delta t$. A flat momentum segment means zero net impulse during that interval, even if the object is still moving.

Graph or data What you read Impulse or force
$F$ versus $t$ Signed area $J=\Delta p$
$p$ versus $t$ Slope $F_{\mathrm{net}}$
Constant $p$ Zero slope Zero net impulse
Equal signed areas Same $\Delta p$ Peak forces may differ

Rebound: a $0.25\,\mathrm{kg}$ ball approaches a bat at $+4.0\,\mathrm{m/s}$ and leaves at $-2.0\,\mathrm{m/s}$. The momentum change is $\Delta p=m(v_f-v_i)=(0.25)(-2.0-4.0)=-1.5\,\mathrm{kg\cdot m/s}$. That equal impulse is delivered during contact. If contact lasts $0.050\,\mathrm{s}$, the average net force is $F_{\mathrm{avg}}=J/\Delta t=-1.5/0.050=-30\,\mathrm{N}$ (opposite the incoming velocity).

The same stopping $\Delta p$ spread over a longer time requires a smaller average force. Padding, crumple zones, and helmets all lengthen contact. Doubling the stopping time halves the average force for a fixed momentum change. Stopping a $2.0\,\mathrm{kg}$ crate from $3.0\,\mathrm{m/s}$ to rest needs $\Delta p=-6.0\,\mathrm{kg\cdot m/s}$; in $0.20\,\mathrm{s}$ the average force magnitude is $30\,\mathrm{N}$, but in $0.40\,\mathrm{s}$ it falls to $15\,\mathrm{N}$.

Direction and size of an opposing impulse decide the outcome. A leftward impulse smaller than the object's initial rightward momentum slows the object but does not reverse it. A larger opposite impulse reverses the velocity. Worked case: a $4.0\,\mathrm{kg}$ cart moves at $+5.0\,\mathrm{m/s}$ ($p_i=+20\,\mathrm{kg\cdot m/s}$) when a constant $-8.0\,\mathrm{N}$ net force begins. After $1.5\,\mathrm{s}$, $J=(-8.0)(1.5)=-12\,\mathrm{N\cdot s}$, so $p=20-12=+8.0\,\mathrm{kg\cdot m/s}$ and $v=+2.0\,\mathrm{m/s}$ (still rightward, slower). After a total of $2.5\,\mathrm{s}$ from the start of the force, $J=(-8.0)(2.5)=-20\,\mathrm{N\cdot s}$, momentum reaches zero, and the cart has stopped. Continuing the same force for another $1.0\,\mathrm{s}$ adds $-8.0\,\mathrm{N\cdot s}$, so $p=-8.0\,\mathrm{kg\cdot m/s}$ and the cart speeds up leftward at $2.0\,\mathrm{m/s}$.

Catching and stopping: mass and the two velocities alone give $\Delta p$, but average force still needs the contact duration. A $0.40\,\mathrm{kg}$ ball arriving at $+6.0\,\mathrm{m/s}$ and brought to rest has $\Delta p=-2.4\,\mathrm{kg\cdot m/s}$. Without knowing how long the catch lasts, you cannot convert that impulse into $F_{\mathrm{avg}}$.

When two objects push on each other during contact, Newton's third law says the contact forces are equal and opposite at every instant and last for the same time. Therefore the impulses those contact forces deliver to the two objects are equal and opposite. (System momentum bookkeeping for multi-object collisions belongs to topic 4.3.)

After a net impulse delivers momentum $p$ to an object that started at rest, the kinetic energy is $K=p^2/(2m)$. A $0.50\,\mathrm{kg}$ puck at rest receives $J=+3.0\,\mathrm{N\cdot s}$, so $p=3.0\,\mathrm{kg\cdot m/s}$ and $K=(3.0)^2/(2\cdot 0.50)=9.0\,\mathrm{J}$.

Lab caution: a force sensor with a constant baseline offset $b$ adds an extra area $bT$ to the measured impulse over contact time $T$. Record the unloaded baseline and subtract it from every force reading before finding the signed area; otherwise the reported impulse is shifted by $bT$.

Key points

  • $J=F_{\mathrm{avg}}\Delta t=\Delta p$, with units $\mathrm{N\cdot s}=\mathrm{kg\cdot m/s}$.
  • Impulse from a constant force points the same way as the force (gravity's impulse is downward).
  • Impulse is signed area under $F$ versus $t$; add positive and negative areas.
  • Net force is the slope of $p$ versus $t$; constant $p$ means zero net impulse.
  • Same $\Delta p$ over longer time means smaller average force (padding, helmets).
  • An opposite impulse smaller than $p_i$ slows without reversing; a larger one reverses.
  • Third-law contact impulses on a pair of objects are equal and opposite.
  • From rest, $K=p^2/(2m)$; subtract a force-sensor baseline before integrating.

Equal impulse (equal signed area) does not mean equal peak force: different pulse shapes can share the same area.

Practice this topic