TOPIC 4.3 · STUDY
Conservation of Linear Momentum
A system's total linear momentum changes only when a net external impulse acts. Choose the system so contact forces of interest are internal, then use conservation when the external impulse during a brief interaction is negligible. Center-of-mass velocity follows from total momentum over total mass and stays fixed when external impulse is zero.
4.3.A
Conservation of linear momentum
The total linear momentum of a system is the vector sum of the momenta of its parts: $\vec{P}=\sum m_i\vec{v}_i$. That total changes only because of a net external impulse: $$\vec{P}_f-\vec{P}_i=\vec{J}_{\mathrm{ext}}.$$ Internal interaction impulses cancel in pairs. By Newton's third law the contact forces are equal and opposite, and they act for the same duration, so their impulses sum to zero in the system total.
System choice decides which forces count as external. A cart slamming into a bumper bolted to Earth is not isolated if you select only the cart (or only the cart and bumper): the Earth supplies a large contact impulse. Include the cart, bumper, and Earth if you want those contact forces internal. A fan cart speeds up because the air pushes the cart forward; the cart-and-fan system alone does not conserve horizontal momentum. Include the air that is pushed backward.
If the external impulse is negligible during a brief collision, total momentum is approximately conserved. The test is force times the short duration, not whether a small force exists at all. Example: a net external force of at most $0.20\,\mathrm{N}$ lasting $0.010\,\mathrm{s}$ bounds the external impulse by $(0.20)(0.010)=0.002\,\mathrm{N\,s}$. Compared with typical collision momentum transfers of several $\mathrm{kg\,m/s}$, that change is tiny, so conservation is a good approximation.
Center-of-mass velocity is total momentum divided by total mass: $$v_{\mathrm{cm}}=\frac{P_{\mathrm{total}}}{M}.$$ When $\vec{J}_{\mathrm{ext}}=0$, $v_{\mathrm{cm}}$ stays constant. For two objects of positive mass, $v_{\mathrm{cm}}$ always lies between their individual velocities. If a $4.0\,\mathrm{kg}$ cart moves at $+5.0\,\mathrm{m/s}$ and a $6.0\,\mathrm{kg}$ cart at $+1.0\,\mathrm{m/s}$, then $P_{\mathrm{total}}=26\,\mathrm{kg\,m/s}$ and $v_{\mathrm{cm}}=2.6\,\mathrm{m/s}$, between $1.0$ and $5.0\,\mathrm{m/s}$.
On a frictionless track with negligible external impulse, a sticking collision is solved from momentum alone. Example: a $2.0\,\mathrm{kg}$ cart at $+3.0\,\mathrm{m/s}$ hits a $1.0\,\mathrm{kg}$ cart at rest and they stick. Initial momentum is $6.0\,\mathrm{kg\,m/s}$ and combined mass is $3.0\,\mathrm{kg}$, so the common velocity is $V=2.0\,\mathrm{m/s}$. Do not analyze the kinetic-energy loss here; sticking is a momentum problem in this topic, and energy classification belongs to topic 4.4.
Push-apart from rest: momenta are equal and opposite, so the lighter cart $m$ is faster than the heavier cart $2m$.
An explosion or spring push-apart from rest likewise gives equal-and-opposite momenta, so the heavier piece is slower. For masses $m$ and $2m$ starting at rest, if the lighter piece leaves at $4.0\,\mathrm{m/s}$ one way, the heavier piece leaves at $2.0\,\mathrm{m/s}$ the other way because $m(4.0)=(2m)(2.0)$. With three fragments, the third momentum closes the vector sum to the initial total: if the system started at rest, $\vec{p}_1+\vec{p}_2+\vec{p}_3=0$.
Contact impulses swap momentum between the interacting objects. If one object gains $+3.0\,\mathrm{kg\,m/s}$ from the contact force, the other gains $-3.0\,\mathrm{kg\,m/s}$. The lighter object has the larger speed change for that shared impulse magnitude because $\Delta v=J/m$.
Momentum is a vector, so each component is conserved separately when the corresponding external impulse is negligible. If the initial total momentum points east, a final northward component on one piece must be canceled by a southward component on the other (or on the rest of the system together).
A skater who throws a ball on frictionless ice started at rest keeps total momentum zero afterward: the skater recoils opposite the ball. Use speeds relative to the ice, not relative to the moving skater, unless you convert carefully between frames. A measured decrease in system momentum on a rough track is external friction (an external impulse), not a failure of the third law. The internal contact impulses still cancel in the system total.
| Situation | Useful system | Momentum outcome |
|---|---|---|
| Brief collision, tiny $J_{\mathrm{ext}}$ | The interacting objects | $P$ approximately conserved |
| Cart hits Earth-mounted bumper | Cart + bumper + Earth | Contact impulses internal |
| Fan cart speeding up | Cart + fan + pushed air | Air carries opposite momentum |
| Push-apart from rest | Both pieces | Momenta equal and opposite |
| Rough track, long coast | Carts alone | $P$ drops from external friction |
Key points
- System momentum changes only through net external impulse: $P_f-P_i=J_{\mathrm{ext}}$.
- Internal impulses cancel in pairs; choose the system so that the forces of interest are internal.
- Conservation during a brief collision requires $J_{\mathrm{ext}}$ to be negligible, judged by $F\Delta t$, not by claiming every force is absent.
- Center-of-mass velocity is $v_{\mathrm{cm}}=P_{\mathrm{total}}/M$ and stays constant when $J_{\mathrm{ext}}=0$.
- Sticking collisions with negligible $J_{\mathrm{ext}}$ give a common velocity from momentum alone; energy classification is topic 4.4.
- Push-apart or explosion from rest: momenta are equal and opposite, so the heavier piece is slower.
- Equal-and-opposite contact impulses mean one object's $+\Delta p$ is the other's $-\Delta p$; the lighter object has larger $|\Delta v|$.
- Vector components matter: a new transverse momentum on one piece requires an opposite transverse component elsewhere in the system.
Internal forces cancel in the system total; they still change each object's momentum.