TOPIC 3.2 · STUDY

Work

Work is energy transferred by a force through a displacement. Use W = F d cos theta or the signed area under an F-versus-x graph; net work equals the change in kinetic energy for a constant-mass particle.

3.2.A

Work

Work by a constant force that is collinear with the displacement is the product of that force and the displacement: $W=F\Delta x$. Work is a scalar measured in joules ($1\,\mathrm{J}=1\,\mathrm{N}\cdot\mathrm{m}$). Choose a positive direction along the path; a force opposite the displacement contributes a negative work. When the force changes from segment to segment, add the signed works.

Example: a $7.0\,\mathrm{N}$ horizontal push moves a crate $3.0\,\mathrm{m}$ to the right. With right as positive, $W=(7.0)(3.0)=21\,\mathrm{J}$. Over three later segments the same force does $+15\,\mathrm{J}$, $-8.0\,\mathrm{J}$, and $+4.0\,\mathrm{J}$; the net work by that force is $11\,\mathrm{J}$.

When the force is not along the displacement, only the parallel component contributes: $W=Fd\cos\theta$, where $\theta$ is the angle between $\vec{F}$ and $\vec{d}$. At $60^\circ$, $\cos 60^\circ=1/2$, so the work is half of $Fd$. At $180^\circ$, $\cos 180^\circ=-1$ and $W=-Fd$. At $90^\circ$, $\cos 90^\circ=0$ and $W=0$.

Example: a $20\,\mathrm{N}$ rope pulls a box through $5.0\,\mathrm{m}$ at $60^\circ$ above the horizontal displacement. Then $W=(20)(5.0)\cos 60^\circ=50\,\mathrm{J}$. If instead a $6.0\,\mathrm{N}$ kinetic-friction force acts while the box moves $2.0\,\mathrm{m}$ to the right, $\theta=180^\circ$ and $W=-(6.0)(2.0)=-12\,\mathrm{J}$.

Any force perpendicular to the instantaneous displacement does zero work. The normal force on a fixed straight ramp or a fixed horizontal floor is perpendicular to the path. Gravity does no work during a purely horizontal carry. A vertical magnetic force does no work while a cart moves horizontally. On a circular wire, the track normal is radial while the displacement is tangential, so the normal again does zero work.

The claim that the normal force never does work is false. When the surface itself moves, the contact point can have a displacement parallel to the normal. Example: a rising platform pushes upward with $N=40\,\mathrm{N}$ while a block on it rises $0.50\,\mathrm{m}$. Then $W_N=(40)(0.50)=20\,\mathrm{J}$. On a fixed floor the same $N$ would do zero work because the vertical displacement is zero.

For a force that varies with position, work is the signed area between the $F$-versus-$x$ graph and the $x$-axis. Area above the axis is positive work; area below is negative. The figure below is a triangle of base $10\,\mathrm{m}$ and height $6.0\,\mathrm{N}$.

Force versus position forming a triangle from the origin up to 6 N at 5 m and back to zero at 10 m.

Signed area under $F(x)$ equals work. The triangle has area $\tfrac12(10)(6.0)=30\,\mathrm{J}$.

The work-energy theorem states that the net work on a particle equals its change in kinetic energy: $W_{\mathrm{net}}=\Delta K$. If $W_{\mathrm{net}}=0$ and mass is constant, the initial and final speeds are equal; the speed may still rise and fall between those endpoints. One force doing positive work does not guarantee $\Delta K>0$: other forces may do more negative work, making $W_{\mathrm{net}}$ negative.

Example: a $2.0\,\mathrm{kg}$ cart starts at rest and receives $W_{\mathrm{net}}=16\,\mathrm{J}$. Then $\Delta K=16\,\mathrm{J}$, so $\tfrac12(2.0)v_f^2=16$ and $v_f=4.0\,\mathrm{m/s}$. If a $25\,\mathrm{N}$ pull does $+25\,\mathrm{J}$ while friction does $-40\,\mathrm{J}$ over the same interval, $W_{\mathrm{net}}=-15\,\mathrm{J}$ and kinetic energy decreases even though the pull did positive work.

Gravity's work between two points depends only on the vertical displacement, not on the path length: $W_g=-mg\Delta y$ with up positive (or $+mg$ times the drop when the object falls). An ideal spring's work depends only on the initial and final stretch or compression, not on how the stretch changed with time. While a spring expands from compression $x_0$ to equilibrium, the $F$-versus-$x$ graph is a triangle of area $\tfrac12 k x_0^2$, so $W_s=+\tfrac12 k x_0^2$. While the spring is stretched slowly from equilibrium out to $x_0$, force and displacement are opposite and $W_s=-\tfrac12 k x_0^2$.

Example: $k=200\,\mathrm{N/m}$ and $x_0=0.10\,\mathrm{m}$. Release from compression gives $W_s=\tfrac12(200)(0.10)^2=1.0\,\mathrm{J}$. Stretching the same spring from $0$ to $0.10\,\mathrm{m}$ gives $W_s=-1.0\,\mathrm{J}$.

A constant force taken around a closed path does zero work because the net displacement is zero: $W=F\Delta x_{\mathrm{net}}=0$. Example: a steady $5.0\,\mathrm{N}$ eastward push that returns a cart to its start after any loop contributes $W=0$ for that complete cycle, even though work was nonzero on individual legs.

At constant speed on a rough floor, the pull's positive work cancels friction's negative work, so $W_{\mathrm{net}}=0$ and $\Delta K=0$. Example: a horizontal pull does $+24\,\mathrm{J}$ while kinetic friction does $-24\,\mathrm{J}$ over the same $d$; the speed at the end matches the speed at the start.

Situation Work Reason
Collinear constant $F$ $W=F\Delta x$ Signed scalar in joules
Force at angle $\theta$ $W=Fd\cos\theta$ Only parallel component
Force $\perp$ displacement $W=0$ Including fixed-surface normal
Rising platform normal $W_N=N\Delta y$ Normal and displacement align
Variable $F(x)$ Signed area under $F(x)$ Negative area if $F$ opposes $dx$
Net of all forces $W_{\mathrm{net}}=\Delta K$ Not one force alone

Key points

  • For collinear constant force, $W=F\Delta x$; add signed works from successive segments.
  • $W=Fd\cos\theta$: $60^\circ$ halves $Fd$, $180^\circ$ gives $-Fd$, and $90^\circ$ gives zero.
  • A force perpendicular to the displacement does zero work; a moving surface can make the normal do work.
  • Work equals the signed area under an $F$-versus-$x$ graph.
  • $W_{\mathrm{net}}=\Delta K$; zero net work means equal endpoint speeds, not that every force did zero work.
  • Gravity's work depends only on vertical change; an ideal spring's work depends only on the endpoint stretches.
  • A constant force around a closed path does zero work; at constant speed, pull work cancels friction work.

Common mistake: treating a perpendicular force as doing work, or equating one force's work with $\Delta K$ instead of using $W_{\mathrm{net}}$.

Practice this topic