TOPIC 3.3 · STUDY

Potential Energy

Near Earth, gravitational potential energy change depends only on mass, g, and height change. Elastic potential energy of an ideal spring is one-half k x squared from the natural length. Potential energy belongs to an interacting system, the zero is arbitrary, and conservative work equals the negative change in U. Use g = 10 m/s^2.

3.3.A

Potential energy

Near Earth the gravitational potential energy of an object-Earth system can be written $U_g=mgh$, where $h$ is height above a chosen zero. Only the change matters for energy accounting: $\Delta U_g=mg\Delta y$. That change depends on the initial and final heights, not on the shape of the path or how long the trip takes. This course uses $g=10\,\mathrm{m/s^2}$.

Example: a $2.5\,\mathrm{kg}$ package is lifted through $\Delta y=3.0\,\mathrm{m}$. Then $\Delta U_g=(2.5)(10)(3.0)=75\,\mathrm{J}$. Doubling the mass to $5.0\,\mathrm{kg}$ at the same height change doubles $\Delta U_g$ to $150\,\mathrm{J}$. Halving $g$ to $5.0\,\mathrm{m/s^2}$ with the original mass halves $\Delta U_g$ to $37.5\,\mathrm{J}$.

The zero of $U_g$ is arbitrary. Shifting the zero by a constant adds the same constant to $U_g$ at every location, so every difference $\Delta U_g$ is unchanged. Forces from $U$ and the predicted motion are therefore unchanged. A negative value of $U_g$ is allowed when the object sits below the chosen zero; that choice does not force kinetic energy to be negative.

Potential energy is a property of an interacting system, not of one object alone. Gravitational potential energy belongs to the object-Earth system. Elastic potential energy belongs to the block-spring (or cart-cord) system. If you leave the spring outside your system boundary, the energy exchange with the spring is treated as work by an external spring force rather than as a change in an internal $U_s$.

An ideal spring stores $U_s=\tfrac12 kx^2$, where $x$ is the stretch or compression measured from the natural (relaxed) length. Omitting the factor $\tfrac12$ is a common error. Because of the $x^2$, doubling $|x|$ multiplies $U_s$ by four. The units of $k$ are $\mathrm{N/m}$, which equal $\mathrm{J/m^2}$. A plot of $U_s$ versus $x^2$ is a straight line through the origin with slope $k/2$.

Elastic potential energy versus stretch for an ideal spring with k = 200 N/m. The parabola U = 100 x^2 rises from the origin.

For $k=200\,\mathrm{N/m}$, $U_s=100x^2$. At $x=0.10\,\mathrm{m}$, $U_s=1.0\,\mathrm{J}$; at $x=0.20\,\mathrm{m}$, $U_s=4.0\,\mathrm{J}$. The same $k$ still gives Hooke's-law force magnitude $F=kx$ (topic 2.8); do not confuse force with energy.

For any conservative interaction, the work done by the conservative force equals the negative change in potential energy: $W_c=-\Delta U$. If two points on a $U$ graph have the same potential energy, the net conservative work between those endpoints is zero, even if the force (the slope of $U$) differed along the way.

Example: an external agent slowly compresses an ideal spring from compression $x$ to $2x$. The stored energy changes by $\Delta U_s=\tfrac12 k(2x)^2-\tfrac12 kx^2=\tfrac32 kx^2$. The spring's conservative work is therefore $W_s=-\tfrac32 kx^2$. The agent does positive work that increases $U_s$; the spring does the opposite.

On a frictionless level track, a cart released from rest against a compressed ideal spring converts elastic energy into kinetic energy of the cart. At the natural length, $\tfrac12 kx^2=\tfrac12 mv^2$ when no other work is done. Example: $k=180\,\mathrm{N/m}$, compression $x=0.20\,\mathrm{m}$, and cart mass $m=0.80\,\mathrm{kg}$ give $U_s=\tfrac12(180)(0.040)=3.6\,\mathrm{J}$. Then $3.6=\tfrac12(0.80)v^2$, so $v=3.0\,\mathrm{m/s}$.

Now lower a mass slowly onto a vertical spring until equilibrium. Force balance gives $ky=mg$, so $y=mg/k$. During the lowering, $\Delta U_s=\tfrac12 ky^2=m^2g^2/(2k)$ and $\Delta U_g=-mgy=-m^2g^2/k$. Example: $m=2.0\,\mathrm{kg}$, $k=100\,\mathrm{N/m}$ yield $y=0.20\,\mathrm{m}$, $\Delta U_s=2.0\,\mathrm{J}$, and $\Delta U_g=-4.0\,\mathrm{J}$. The mass starts and ends at rest, so $\Delta K=0$ and the external agent must do $W_{\mathrm{ext}}=\Delta U_s+\Delta U_g=-2.0\,\mathrm{J}$. Mechanical energy of spring-plus-gravity alone is not conserved while that agent removes energy.

Quantity Expression Watch for
Gravitational change $\Delta U_g=mg\Delta y$ Path shape does not enter
Elastic spring $U_s=\tfrac12 kx^2$ Include $\tfrac12$; $x$ from natural length
Conservative work $W_c=-\Delta U$ Equal endpoint $U$ means $W_c=0$
Slow vertical lower to $ky=mg$ $\Delta U_s=m^2g^2/(2k)$, $\Delta U_g=-m^2g^2/k$ Agent work is negative

Two carts at rest on a frictionless track with a compressed spring between them (spring not attached) convert the initial $U_s$ into the sum of both kinetic energies after the spring reaches its natural length. Momentum conservation for the isolated pair splits the speeds inversely with mass: the lighter cart leaves faster. Keep the momentum step brief; the energy story is that one shared $U_s$ becomes $K_1+K_2$.

Key points

  • Near Earth, $\Delta U_g=mg\Delta y$ depends only on mass, $g$, and height change; path and time do not enter. Use $g=10\,\mathrm{m/s^2}$.
  • The zero of $U_g$ is arbitrary; adding a constant everywhere leaves differences, forces, and motion predictions unchanged. Negative $U_g$ is allowed.
  • Potential energy belongs to an interacting system: object-Earth for $U_g$, block-spring (or cord) for $U_s$.
  • Ideal spring: $U_s=\tfrac12 kx^2$ from the natural length. Doubling $|x|$ multiplies $U_s$ by 4. Units: $\mathrm{N/m}=\mathrm{J/m^2}$; slope of $U_s$ versus $x^2$ is $k/2$.
  • Hooke's-law force magnitude is still $F=kx$; do not treat force as energy.
  • Conservative work: $W_c=-\Delta U$. Equal endpoint $U$ means zero net conservative work between those points.
  • Frictionless level launch from rest: $\tfrac12 kx^2=\tfrac12 mv^2$ at the natural length.
  • Slow lower to vertical equilibrium $ky=mg$: $\Delta U_s=m^2g^2/(2k)$, $\Delta U_g=-m^2g^2/k$, and the agent does negative work because $\Delta K=0$.

Writing $U_s=kx^2$ without the factor $\tfrac12$ is wrong for an ideal spring. The zero of potential energy can be placed anywhere; only changes in $U$ enter the work-energy relation.

Practice this topic