Kinetic Theory of Temperature and Pressure MCQ Practice

Question 1 of 10

A molecule of mass $6.0\times 10^{-26}\,\mathrm{kg}$ approaches a fixed, rigid wall at $400\,\mathrm{m/s}$. The angle between its velocity and the normal to the wall is $60^\circ$. The collision is elastic, and the wall does not move. What is the magnitude of the molecule’s change in momentum?

  1. A. $0$, because the wall is fixed
  2. B. $1.2\times 10^{-23}\,\mathrm{kg\cdot m/s}$
  3. C. $2.4\times 10^{-23}\,\mathrm{kg\cdot m/s}$
  4. D. $4.8\times 10^{-23}\,\mathrm{kg\cdot m/s}$

Question 2 of 10

Two samples of ideal gas have the same number of molecules, the same volume, and the same $v_{\mathrm{rms}}$. A molecule of gas 2 has twice the mass of a molecule of gas 1. What is $P_2/P_1$?

  1. A. $1/2$
  2. B. $1$
  3. C. $4$
  4. D. $2$

Question 3 of 10

During a short interval, one molecule in a gas moves parallel to a container wall and does not strike that wall. Which statement correctly describes that molecule’s contribution to the pressure on the wall during the interval?

  1. A. None: it transfers no perpendicular momentum to the wall.
  2. B. It still contributes, because pressure exists at every point in the gas.
  3. C. It contributes an impulse $mv$, using its full speed.
  4. D. It contributes an impulse $2mv$, as in a head-on elastic rebound.

Question 4 of 10

A thin rigid disk hangs at rest in the interior of a gas in equilibrium, far from the container walls. Which statement is correct?

  1. A. The pressure on the disk is zero because pressure acts only on the outer container.
  2. B. The net force on the disk equals the pressure times the area of one face.
  3. C. Each face feels a nonzero time-averaged pressure, and those pressures are equal, so the net force can be zero.
  4. D. Molecules in the interior collide only with one another, so an interior surface feels no collisions.

Question 5 of 10

A fixed number of molecules of a single ideal gas is sealed in a rigid container. The rms speed is then doubled, with no molecules added or removed. By what factor does the pressure increase?

  1. A. $\sqrt{2}$
  2. B. $4$
  3. C. $2$
  4. D. $8$

Question 6 of 10

Five molecules in a sample have the speeds in the table. Which value is closest to $v_{\mathrm{rms}}$ for this sample?

Molecule Speed (m/s)
1 200
2 300
3 400
4 500
5 600
  1. A. $400\,\mathrm{m/s}$
  2. B. $450\,\mathrm{m/s}$
  3. C. $500\,\mathrm{m/s}$
  4. D. $424\,\mathrm{m/s}$

Question 7 of 10

The average translational kinetic energy of the molecules in a gas is $6.21\times 10^{-21}\,\mathrm{J}$. Use $k=1.38\times 10^{-23}\,\mathrm{J/K}$. What is the temperature of the gas?

  1. A. $300\,\mathrm{K}$
  2. B. $150\,\mathrm{K}$
  3. C. $450\,\mathrm{K}$
  4. D. $900\,\mathrm{K}$

Question 8 of 10

Helium atoms ($4\,\mathrm{u}$) and nitrogen molecules ($28\,\mathrm{u}$) are in separate containers at the same temperature. What is $v_{\mathrm{rms,He}}/v_{\mathrm{rms,N_2}}$?

  1. A. $7$
  2. B. $2$
  3. C. $\sqrt{7}$
  4. D. $1/\sqrt{7}$

Question 9 of 10

The graph shows Maxwell–Boltzmann speed distributions for the same gas and the same number of molecules. Curve X peaks at $2\times 10^2\,\mathrm{m/s}$. Curve Y peaks at $4\times 10^2\,\mathrm{m/s}$ and has a lower peak. Which statement is correct?

Two speed distributions. Curve X peaks near 200 m/s. Curve Y peaks near 400 m/s and is shorter and broader.
  1. A. The samples have the same temperature because the areas under the curves represent the same number of molecules.
  2. B. The sample for Y is at four times the temperature of the sample for X.
  3. C. The sample for Y is at twice the temperature of the sample for X.
  4. D. The sample for Y is at half the temperature of the sample for X because its peak is lower.

Question 10 of 10

In a gas at temperature $T$, one molecule is moving much more slowly than $v_{\mathrm{rms}}$. Which statement is correct?

  1. A. That molecule has a lower temperature than the rest of the sample.
  2. B. The gas temperature is the temperature of the fastest molecules only.
  3. C. Removing the slow molecule must multiply both the pressure and the temperature by the same factor.
  4. D. Temperature describes the average translational kinetic energy of the sample. One slow molecule does not have a temperature of its own.