TOPIC 11.2 · STUDY

Simple Circuits

A closed circuit is a continuous path for charge. An open switch stops the steady current. A short lets charge flow with almost no potential change along that path.

11.2.A

Closed, open, and short paths

A closed circuit is a continuous conducting path that charge can follow all the way around. An open path has a gap, so the steady current is zero. A short is a low-resistance path that lets charge flow with negligible potential difference along that shorting path.

A loop with a battery, a resistor R, and an open switch S.
A loop with a battery, a resistor R, and an open switch S.

Switch S is open, so the loop is not a continuous path and the steady current is zero.

In the figure, switch $S$ is open. The loop is not a continuous path, so the steady current is zero even though the battery still has an emf.

Closed means a continuous path for charge. Open means a gap and zero steady current. A short allows flow with almost no potential change along the short, such as a wire placed across the battery terminals.

On a battery symbol, the long line is the higher-potential terminal. Conventional current leaves that terminal and returns to the short line. Circuit schematics use conventional current.

An ammeter belongs in series with the path whose current you measure. A voltmeter connects across an element to read the potential difference. One circuit element can belong to more than one loop.

A switch in series completes or breaks the path through the circuit. It is not a bypass around the resistor; opening the series switch stops the steady current in that path.

Key points

  • Closed means a continuous path; open means a gap and zero steady current.
  • A short lets charge flow with negligible potential difference along that path.
  • The long battery line is the higher-potential terminal.
  • Conventional current leaves the long line and returns to the short line.
  • Schematics use conventional current.
  • An ammeter is in series; a voltmeter connects across an element.
  • One element can belong to more than one loop.
  • A series switch completes or breaks the path; it is not a bypass around the resistor.

An open path means zero steady current even if the battery still has an emf.

Practice this topic