Simple Circuits MCQ Practice

Question 1 of 10

A battery, a resistor, and an open switch form a single loop. While the switch remains open, which description is correct?

  1. A. The circuit is closed; a steady current exists.
  2. B. The circuit is open; the steady current is zero.
  3. C. The circuit is shorted; the potential difference around the loop is zero.
  4. D. The battery emf must be zero because no current is measured.

Question 2 of 10

A thick copper bar is connected directly across the terminals of an ideal battery, with no other circuit elements. This arrangement is best classified as

  1. A. an open circuit, because copper has zero resistance.
  2. B. a short circuit: charge can flow with essentially no potential difference across the bar.
  3. C. a series circuit of many resistors.
  4. D. impossible, because ideal batteries cannot be connected to wires.

Question 3 of 10

In a schematic drawn for AP Physics 2, conventional current is used unless stated otherwise. For a battery symbol with the long line on the left and the short line on the right connected through an external resistor, the conventional current in the external resistor is directed

  1. A. toward the long line (higher potential terminal) through the resistor.
  2. B. toward the short line (lower potential terminal) through the resistor.
  3. C. only inside the battery, never in the resistor.
  4. D. undefined, because current is not a vector.

Question 4 of 10

Circuit 1 has a battery and one bulb in a single closed loop. Circuit 2 is identical except a second bulb is added in a separate parallel branch across the first bulb. Which claim is correct?

  1. A. Both circuits have exactly one electrical loop.
  2. B. Circuit 2 has more than one closed loop that includes the battery.
  3. C. Adding the parallel branch opens Circuit 2.
  4. D. Circuit 2 must be a short circuit.

Question 5 of 10

A single resistor is part of two different loops that share that resistor in a multi-loop circuit. Which statement is correct?

  1. A. A circuit element can belong to only one loop.
  2. B. A single element may participate in multiple loops.
  3. C. Shared elements force the circuit to be open.
  4. D. Shared elements always create a short.

Question 6 of 10

A series circuit contains a battery, resistor $R_1$, and a switch in series with $R_1$. With the switch closed, which statement about the circuit is correct?

  1. A. The circuit is open, so the current is zero.
  2. B. The circuit is closed, so charge can flow around the loop.
  3. C. The switch creates a short that bypasses $R_1$.
  4. D. The battery is disconnected from the loop.

Question 7 of 10

Students compare three diagrams of the same battery and bulb: (1) connecting wires intact, (2) one wire disconnected, (3) an additional wire connecting the battery terminals while the bulb path remains. Which labeling is correct?

  1. A. (1) closed, (2) open, (3) includes a shorting path across the battery.
  2. B. (1) open, (2) closed, (3) open.
  3. C. All three are closed circuits with identical currents.
  4. D. (3) is open because the bulb still has a path.

Question 8 of 10

Which device is primarily used to interrupt a closed path so that charge cannot flow continuously?

  1. A. A closed switch
  2. B. An open switch
  3. C. An ideal ammeter
  4. D. An ideal wire

Question 9 of 10

A schematic shows a battery, two resistors in series, an ammeter in series, and a voltmeter connected across one resistor. Which statement about the arrangement is correct?

  1. A. The voltmeter must be in series with the resistor it measures.
  2. B. The ammeter is placed in the loop path; the voltmeter is across an element.
  3. C. Both meters must be in parallel with the battery only.
  4. D. Including an ammeter always creates an open circuit.

Question 10 of 10

The table lists three circuit states. Which row correctly matches the state to the possibility of a steady nonzero current in a single-loop resistive circuit with one ideal battery?

State Path status
Open Gap in the loop
Closed Continuous resistive path
Short across battery Near-zero resistance path across terminals
  1. A. Only the closed state can have a finite steady resistive current as intended; a battery short is not the designed resistive path.
  2. B. Only the open state has nonzero current.
  3. C. All three states have identical nonzero currents.
  4. D. A short across the battery forbids any charge motion.