TOPIC 2.2 · STUDY

Forces and Free-Body Diagrams

A free-body diagram lists only forces exerted on one chosen object, each by another object, drawn from a single dot. Contact forces need touching; gravity does not. Draw one weight mg straight down, resolve it into components when axes tilt, and never treat velocity, throws, or internal engine pushes as forces on the diagram.

2.2.A

Forces and free-body diagrams

A free-body diagram (FBD) shows every force exerted on one chosen object by some other object. Collapse the object to a single dot (the particle model) and draw every arrow from that same point. Do not draw forces the chosen object exerts on something else; those belong on the other object's diagram. Do not draw the net force as an extra arrow; the net force is what you compute from the arrows that are already there.

Contact forces require touching and vanish the instant contact ends. Long-range forces, especially gravity, act across empty space. After a ball leaves a hand there is no "force of the throw," because the hand is no longer interacting with the ball. A puck keeps sliding because it already has velocity, not because a forward force remains. Take $g=10\,\mathrm{m/s^2}$ throughout this topic.

Particle-model free-body diagram: one central dot with three force arrows labeled mg down, N up, and f left along the surface.

One dot, three forces on a rough level surface: weight straight down, normal force straight up, and friction parallel to the surface opposing the slide.

Exactly one gravitational arrow appears, straight down, with magnitude $mg$. Do not also draw $mg\sin\theta$ and $mg\cos\theta$ as extra forces beside that arrow; those labels are components of the one weight in rotated axes. Either keep the single $mg$ arrow and resolve it when writing equations, or replace it with the two component arrows, but never count both versions at once.

On an incline, a useful axis pair is parallel and perpendicular to the surface. The normal force is perpendicular to the surface and points away from it. Friction is parallel to the surface and opposes sliding (or the tendency to slide). Only the weight is oblique to those axes, so only the weight needs components: $mg\sin\theta$ along the surface and $mg\cos\theta$ into the surface. On a frictionless incline with no other forces into the surface, $N=mg\cos\theta$.

Example: a $5.0\,\mathrm{kg}$ block on a frictionless $37^\circ$ incline has weight $mg=50\,\mathrm{N}$. With $\sin 37^\circ=0.60$ and $\cos 37^\circ=0.80$, the along-slope component is $30\,\mathrm{N}$ and the into-surface component is $40\,\mathrm{N}$, so $N=40\,\mathrm{N}$. The net force is $30\,\mathrm{N}$ down the incline.

A rope pulling above the horizontal carries part of the load. If there is no vertical acceleration, $N+T\sin\theta=mg$, so $N$ is smaller than $mg$. For an $8.0\,\mathrm{kg}$ sled ($mg=80\,\mathrm{N}$) pulled by $T=40\,\mathrm{N}$ at $30^\circ$ above the horizontal, $N=80-(40)(0.50)=60\,\mathrm{N}$. A horizontal push into a wall sets $N$ equal to that push when there is no horizontal acceleration, because the wall's normal force is the only opposing horizontal contact force.

Constant velocity means zero net force, but the individual forces are still drawn; they simply cancel. A bathroom scale reads the normal force it exerts, not the weight $mg$. If a $50\,\mathrm{kg}$ rider ($mg=500\,\mathrm{N}$) sees a scale reading of $450\,\mathrm{N}$, the net force is $50\,\mathrm{N}$ downward and the acceleration is $1.0\,\mathrm{m/s^2}$ downward. That reading is consistent with moving up and slowing or moving down and speeding up; the sign of $a$ does not fix the direction of $v$.

Forces inside a car, such as the engine pushing on the drivetrain, are internal and do not appear on the car's free-body diagram. The external forward force from the road on the drive tires does appear. Listing both an "engine force" and road friction double-counts the same push.

Situation Forces on the FBD Common mistake
Ball after leaving the hand $mg$ down (and drag if air matters) Keeping a "force of the throw"
Block sliding on rough floor, no push $mg$ down, $N$ up, $f$ opposite the velocity Adding a forward force of motion
Frictionless incline, axes along the surface $mg$ (or its two components), $N$ away from the surface Drawing $mg\sin\theta$ and $mg\cos\theta$ in addition to $mg$
Rope above horizontal, level ground $mg$, $N$, $T$ (and $f$ if rough) Setting $N=mg$ and ignoring $T\sin\theta$
Car accelerating on level road $mg$, $N$, forward friction from the road Adding an internal engine arrow

Key points

  • An FBD shows only forces on the chosen object, each exerted by another object, all drawn from one dot.
  • Contact forces need touching and vanish when contact ends; gravity is long-range and always appears as one downward $mg$ arrow.
  • Velocity, throws after release, and inertia are not forces; do not invent arrows for them.
  • On an incline, align axes with the surface: $N$ is perpendicular, friction is parallel, and only weight needs $mg\sin\theta$ and $mg\cos\theta$.
  • On a frictionless incline, $N=mg\cos\theta$; a rope above horizontal reduces $N$ via $N+T\sin\theta=mg$ when $a_y=0$.
  • A horizontal push into a wall sets $N$ equal to the push when $a_x=0$.
  • Constant velocity means $\sum\vec{F}=0$, but balanced forces are still drawn; a scale reads $N$, and $N<mg$ means downward acceleration.
  • Internal engine forces stay off the car's FBD; the road's forward force stays on.

Components of the weight are not extra forces, and a force needs a second object exerting it.

Practice this topic