TOPIC 1.2 · STUDY

Displacement, Velocity, and Acceleration

Displacement, velocity, and acceleration on a line: averages versus instantaneous values, when speed rises or falls from signs of v and a, the constant-acceleration equations (with a short derivation of the time-free form), reversals, and free fall with g = 10 m/s^2.

1.2.A

Displacement, velocity, and acceleration

Along a straight line, choose a positive direction and stay with it. Displacement $\Delta x$ is the signed change of position. Velocity is the rate of change of position; acceleration is the rate of change of velocity. This course uses $g=10\,\mathrm{m/s^2}$ near Earth and ignores air resistance unless a problem says otherwise.

Average velocity is displacement divided by elapsed time: $v_{\mathrm{avg}}=\Delta x/\Delta t$. Average speed is total distance traveled divided by the same elapsed time. Average speed is not the arithmetic mean of two speeds unless the object spent equal times at each speed. A round trip that returns to the start has $\Delta x=0$, so $v_{\mathrm{avg}}=0$, while the path length is positive, so average speed is nonzero.

Example: a walker goes $120\,\mathrm{m}$ east in $40\,\mathrm{s}$, then $120\,\mathrm{m}$ west in $60\,\mathrm{s}$. Net displacement is zero, so $v_{\mathrm{avg}}=0$. Total distance is $240\,\mathrm{m}$ in $100\,\mathrm{s}$, so average speed is $2.4\,\mathrm{m/s}$. Averaging the two leg speeds ($3.0$ and $2.0\,\mathrm{m/s}$) would wrongly give $2.5\,\mathrm{m/s}$.

Instantaneous velocity is the limit of average velocity as the time interval shrinks around one instant. Acceleration is how fast velocity changes. Average acceleration over an interval is $a_{\mathrm{avg}}=\Delta v/\Delta t$. When acceleration is constant, that ratio is also the instantaneous value at every moment in the interval.

Speed is the magnitude of velocity. Speed increases when velocity and acceleration have the same sign (both positive or both negative). Speed decreases when $v$ and $a$ have opposite signs. A negative acceleration does not automatically mean "slowing down"; it only means velocity is becoming more negative. An object with $v=-6\,\mathrm{m/s}$ and $a=-2\,\mathrm{m/s^2}$ is speeding up in the negative direction.

$v$ $a$ Speed
$+$ $+$ increasing
$+$ $-$ decreasing
$-$ $-$ increasing
$-$ $+$ decreasing

When acceleration is constant, a velocity-versus-time graph is a straight line whose slope is $a$. The figure below shows one such line that starts at $+8\,\mathrm{m/s}$ and falls through zero to $-4\,\mathrm{m/s}$. Reading slopes and areas in depth belongs to topic 1.3; here the graph is only a picture of steady $a=-2\,\mathrm{m/s^2}$.

A straight velocity-time line falls from $+8\,\mathrm{m/s}$ at $t=0$ to $-4\,\mathrm{m/s}$ at $t=6\,\mathrm{s}$, crossing zero at $t=4\,\mathrm{s}$.

Constant acceleration appears as a straight $v(t)$ line. Velocity is positive before $t=4\,\mathrm{s}$ and negative afterward; the slope stays $-2\,\mathrm{m/s^2}$ the whole time.

For constant acceleration the working equations are $v=v_0+at$, $\Delta x=v_0t+\tfrac12 at^2$, $\Delta x=\tfrac12(v_0+v)t$, and $v^2=v_0^2+2a\Delta x$. The middle displacement formula that averages the endpoint velocities is valid only when $a$ is constant. If velocity wanders irregularly between the same endpoints, that average need not equal the true average velocity.

A short derivation of the time-free equation: start from $v=v_0+at$, so $t=(v-v_0)/a$ when $a\neq 0$. Substitute into $\Delta x=\tfrac12(v_0+v)t$ to get $\Delta x=\tfrac12(v_0+v)(v-v_0)/a=(v^2-v_0^2)/(2a)$. Multiply both sides by $2a$ and rearrange: $v^2=v_0^2+2a\Delta x$. The same result follows from substituting $t$ into $\Delta x=v_0t+\tfrac12 at^2$.

If the object reverses direction, split the motion at the instant $v=0$ before adding distances. Each leg has its own path length; total distance is the sum of those lengths. Displacement for the whole trip stays signed: it is still $x_{\mathrm{final}}-x_{\mathrm{initial}}$, so forward and backward pieces partially cancel.

Example with original numbers: a cart has $v_0=+9.0\,\mathrm{m/s}$ and $a=-3.0\,\mathrm{m/s^2}$. It stops at $t=v_0/|a|=3.0\,\mathrm{s}$ after traveling $\Delta x=\tfrac12(9.0)(3.0)=13.5\,\mathrm{m}$. From $3.0$ to $5.0\,\mathrm{s}$ it backs up $\tfrac12(3.0)(2.0)^2=6.0\,\mathrm{m}$. Distance over $5.0\,\mathrm{s}$ is $13.5+6.0=19.5\,\mathrm{m}$; net displacement is $+13.5-6.0=+7.5\,\mathrm{m}$.

In free fall near Earth, take up as positive so $a=-10\,\mathrm{m/s^2}$ the whole time, including at the top of a vertical toss where $v=0$ for an instant. Acceleration does not become zero at the peak; only velocity does. A ball tossed upward at $v_0=+15\,\mathrm{m/s}$ from $y=0$ reaches the top when $v=0$: $0=15-10t$ gives $t=1.5\,\mathrm{s}$, and $\Delta y=\tfrac12(15)(1.5)=11.25\,\mathrm{m}$. On the way down the same $a=-10\,\mathrm{m/s^2}$ continues to act.

A given position function can be matched to $x(t)=x_0+v_0t+\tfrac12 at^2$. The constant term is $x_0$, the coefficient of $t$ is $v_0$, and twice the coefficient of $t^2$ is $a$. For $x(t)=5.0+3.0t-2.0t^2$ (meters, seconds), read $x_0=5.0\,\mathrm{m}$, $v_0=+3.0\,\mathrm{m/s}$, and $\tfrac12 a=-2.0$ so $a=-4.0\,\mathrm{m/s^2}$. Then $v(t)=v_0+at=3.0-4.0t$ follows at once.

Key points

  • Average velocity is $\Delta x/\Delta t$; average speed is distance over time, not the mean of two speeds.
  • A round trip can have zero average velocity and nonzero average speed.
  • Speed rises when $v$ and $a$ share a sign; a negative $a$ alone does not mean slowing.
  • Constant $a$ gives $v=v_0+at$, $\Delta x=v_0t+\tfrac12 at^2$, $\Delta x=\tfrac12(v_0+v)t$, and $v^2=v_0^2+2a\Delta x$.
  • On a reversal, split at $v=0$ to add distances; keep displacement signed.
  • In free fall, $a=-10\,\mathrm{m/s^2}$ (up positive) even at the top of the toss.
  • Match $x(t)$ to $x_0+v_0t+\tfrac12 at^2$ to read $v_0$ and $a$.

The average of two speeds is not the average speed, and $\Delta x=\tfrac12(v_0+v)t$ requires constant acceleration.

Practice this topic