Rotational Kinematics MCQ Practice

Question 1 of 10

An angular-position sensor reports 350° followed by 10°. The wheel turned a small angle counterclockwise across the zero mark. What is its angular displacement?

  1. A. $-17\pi/9$ rad
  2. B. $2\pi$ rad
  3. C. $0$ rad
  4. D. $\pi/9$ rad

Question 2 of 10

A wheel has angular velocity +5 rad/s and its angular acceleration remains zero over an interval. Which conclusion is justified?

  1. A. It continues rotating at +5 rad/s.
  2. B. It is at rest.
  3. C. Its angular position is constant.
  4. D. It must be slowing down.

Question 3 of 10

A wheel has a net angular displacement of +18 rad in 6 s. Which quantity is determined without additional information?

  1. A. Initial angular speed
  2. B. Average angular velocity
  3. C. Final angular velocity
  4. D. Constant angular acceleration

Question 4 of 10

A disk has angular velocity -6 rad/s at t=0 and constant angular acceleration +2 rad/s². When does it reverse its direction of rotation?

  1. A. 6 s
  2. B. It never reverses.
  3. C. 3 s
  4. D. 2 s

Question 5 of 10

An angular-position graph is concave downward and has a positive slope throughout an interval. Which description is correct?

  1. A. Clockwise rotation that speeds up, with counterclockwise positive
  2. B. Constant positive angular velocity
  3. C. Positive angular acceleration
  4. D. Counterclockwise rotation that slows, with counterclockwise positive

Question 6 of 10

The graph shows angular acceleration. What is the change in angular velocity over 4 s?

Angular acceleration is +3 rad/s squared for 0 to 2 s, then -2 rad/s squared for 2 to 4 s.
  1. A. +2 rad/s
  2. B. +6 rad/s
  3. C. -2 rad/s
  4. D. 0 rad/s

Question 7 of 10

A wheel makes one full clockwise revolution and one-half revolution counterclockwise. With counterclockwise positive, what is its net angular displacement?

  1. A. $-3\pi$ rad
  2. B. $-\pi$ rad
  3. C. $+\pi$ rad
  4. D. $3\pi$ rad

Question 8 of 10

A motor brings a rotor from rest to angular speed w with constant angular acceleration. It then brings a second identical rotor from rest to the same speed with half that acceleration. How do the angular displacements compare?

  1. A. The displacements are equal.
  2. B. The second displacement is four times the first.
  3. C. The second displacement is twice the first.
  4. D. The second displacement is half the first.

Question 9 of 10

For a rigid rotating wheel, which statement about a point near the center and a point near the rim is correct?

  1. A. The rim point has a larger angular displacement.
  2. B. The center-near point always has zero angular displacement.
  3. C. Their angular displacements depend on their masses.
  4. D. Their angular displacements are equal over the same interval.

Question 10 of 10

A wheel starts at +1 rad/s and has constant angular acceleration +2 rad/s². What is its angular speed after rotating through +12 rad?

  1. A. 7 rad/s
  2. B. 5 rad/s
  3. C. 25 rad/s
  4. D. 6 rad/s