Fault Tolerance MCQ Practice

Question 1 of 10

Buildings A, B, and C are linked by A-B, B-C, and A-C.

Which statement is true if B-C fails?

  1. A. Only building B can send data; A and C must shut down.
  2. B. Fault tolerance requires cutting A-B as well.
  3. C. A can still reach C directly via A-C, and B can reach C via B-A-C.
  4. D. All three buildings permanently lose every route.

Question 2 of 10

A transit agency publishes this link list.

Link Endpoints
T1 Depot-North
T2 North-Yard
T3 Depot-Yard
T4 Yard-Dock

If T2 fails, which statement is correct for Depot to Yard traffic?

  1. A. Yard is unreachable from Depot because T2 was the only possible idea.
  2. B. Dock becomes the required next hop for every Depot packet.
  3. C. Redundancy means deleting T3 during failures.
  4. D. Depot-Yard still works over T3.

Question 3 of 10

Which example shows a system that is NOT fault-tolerant for sender S to receiver R?

  1. A. S-R is the only link, and it breaks.
  2. B. S-A-R and S-B-R both exist, and only S-A fails.
  3. C. S-A-R and S-R both exist, and only A fails while S-R stays up.
  4. D. Many alternate routes exist and one minor router reboots.

Question 4 of 10

Nodes D, E, F, G have links D-E, E-F, F-G, D-F, and E-G.

Which pair remains connected if E-F fails?

  1. A. Only D and E if every other link is also cut
  2. B. D and G, for example via D-F-G or D-E-G
  3. C. No pair of nodes can communicate after any failure.
  4. D. Only F and G, and only if D is powered off

Question 5 of 10

What is one primary benefit of fault tolerance on networks like the Internet?

  1. A. Every path must be unique and never duplicated.
  2. B. Devices must refuse all open protocols.
  3. C. Users can continue to use the network even when some components fail.
  4. D. Failures become more frequent by design.

Question 6 of 10

A sports arena has cameras Cam connected to mixer Mix through primary fiber P and backup fiber B.

Primary fiber P is cut. What should a fault-tolerant design do?

  1. A. Disable Mix permanently.
  2. B. Erase camera IP addresses.
  3. C. Require handwritten delivery of every frame to the booth.
  4. D. Send subsequent video via backup fiber B.

Question 7 of 10

Which statement about redundancy and scale is most accurate?

  1. A. Redundant routing options increase reliability and help the Internet scale to more devices and people.
  2. B. Redundancy always decreases the number of devices that can join.
  3. C. Scaling requires removing every duplicate path first.
  4. D. Reliability and scale are unrelated to routing options.

Question 8 of 10

A diagram is described by links North-Core, Core-South, and North-South.

Core fails completely. What happens to North-South communication?

  1. A. Only UDP packets may travel; TCP packets are discarded by policy.
  2. B. It can continue over the direct North-South link.
  3. C. It must stop because Core is required for every possible design.
  4. D. IP addresses for North and South are automatically deleted.

Question 9 of 10

Engineers add a second undersea cable between two coastal cities already linked by one cable.

What are they primarily improving?

  1. A. A requirement that both cities power down daily
  2. B. Removal of IP addressing on both coasts
  3. C. Fault tolerance through path redundancy
  4. D. A rule that forbids any packet metadata

Question 10 of 10

Which scenario identifies a vulnerability to failure?

  1. A. Each clinic has two independent paths to records and monitors both.
  2. B. Meshes of many routes exist among clinics and the records center.
  3. C. Failed links are automatically bypassed because several disjoint paths remain.
  4. D. All regional clinics connect to records only through one shared bridge device with no alternate path.