Approximating Areas with Riemann Sums MCQ Practice

Question 1 of 10

Approximate $\int_0^2 (x^2+1)\,dx$ with a left Riemann sum using $n=2$ equal subintervals.

  1. A. $1\bigl(1+2\bigr)=3$
  2. B. $1\bigl(2+5\bigr)=7$
  3. C. $1\bigl(\tfrac{5}{4}+\tfrac{13}{4}\bigr)=\dfrac{9}{2}$
  4. D. $2\bigl(1+2\bigr)=6$

Question 2 of 10

Using the table, a trapezoidal approximation of $\int_0^9 h(x)\,dx$ with three equal subintervals equals

$x$ $h(x)$
$0$ $4$
$3$ $6$
$6$ $5$
$9$ $3$
  1. A. $3(4+6+5+3)=54$
  2. B. $\dfrac{3}{2}(4+6+5+3)=27$
  3. C. $\dfrac{3}{2}\bigl(4+2\cdot 6+2\cdot 5+3\bigr)=\dfrac{87}{2}$
  4. D. $3\bigl(\dfrac{4+3}{2}\bigr)=\dfrac{21}{2}$

Question 3 of 10

If $f$ is concave down on $[a,b]$, a midpoint Riemann sum with equal subintervals tends to

  1. A. overestimate $\int_a^b f(x)\,dx$
  2. B. underestimate $\int_a^b f(x)\,dx$
  3. C. match a left Riemann sum exactly
  4. D. ignore the width $\Delta x$

Question 4 of 10

For $f(x)=9-x^2$ on $[0,3]$ with $n=3$, the midpoint Riemann sum is

  1. A. $1\bigl(9+8+5\bigr)=22$
  2. B. $1\bigl(8+5+0\bigr)=13$
  3. C. $1\bigl(\tfrac{35}{4}+\tfrac{27}{4}+\tfrac{11}{4}\bigr)=\dfrac{73}{4}$
  4. D. $1\bigl(\tfrac{31}{4}+\tfrac{23}{4}+\tfrac{7}{4}\bigr)=\dfrac{61}{4}$

Question 5 of 10

A Riemann sum uses subinterval widths that are not all equal. Is that allowed?

  1. A. Yes. Riemann sums may use unequal $\Delta x_i$, provided each sample point lies in its subinterval.
  2. B. No. Every Riemann sum must use equal widths.
  3. C. Only midpoint sums may use unequal widths.
  4. D. Only trapezoidal sums may use unequal widths.

Question 6 of 10

Approximate $\int_0^4 2^x\,dx$ with a right Riemann sum using $n=4$ equal subintervals.

  1. A. $1\bigl(1+2+4+8\bigr)=15$
  2. B. $1\bigl(2+4+8+16\bigr)=30$
  3. C. $1\bigl(\sqrt{2}+2\sqrt{2}+4\sqrt{2}+8\sqrt{2}\bigr)=15\sqrt{2}$
  4. D. $4\bigl(2+4+8+16\bigr)=120$

Question 7 of 10

The table is used for a left Riemann sum of $\int_1^7 f(x)\,dx$ with three equal subintervals. Which heights are used?

$x$ $f(x)$
$1$ $10$
$3$ $8$
$5$ $6$
$7$ $5$
  1. A. $f(3)$, $f(5)$, $f(7)$
  2. B. $f(2)$, $f(4)$, $f(6)$
  3. C. $f(1)$, $f(3)$, $f(5)$
  4. D. $f(1)$, $f(7)$ only

Question 8 of 10

For $f(x)=x^2$ on $[1,3]$ with $n=4$, a midpoint sum equals

  1. A. $\dfrac{1}{2}\left(\left(\dfrac{5}{4}\right)^2+\left(\dfrac{7}{4}\right)^2+\left(\dfrac{9}{4}\right)^2+\left(\dfrac{11}{4}\right)^2\right)=\dfrac{69}{8}$
  2. B. $\dfrac{1}{2}\bigl(1^2+\left(\tfrac{3}{2}\right)^2+2^2+\left(\tfrac{5}{2}\right)^2\bigr)=\dfrac{27}{4}$
  3. C. $\dfrac{1}{2}\bigl(\left(\tfrac{3}{2}\right)^2+2^2+\left(\tfrac{5}{2}\right)^2+3^2\bigr)=\dfrac{43}{4}$
  4. D. $\dfrac{1}{2}\bigl(1+4+9\bigr)=7$

Question 9 of 10

A continuous $f$ is increasing and concave down on $[0,10]$. Which pair is correct for equal-width approximations?

  1. A. Left overestimates; trapezoidal overestimates
  2. B. Right underestimates; trapezoidal overestimates
  3. C. Left underestimates; trapezoidal overestimates
  4. D. Left underestimates; trapezoidal underestimates

Question 10 of 10

Why might a table of values be used instead of a formula when building a Riemann sum?

  1. A. Tables automatically produce the exact integral.
  2. B. Only discrete measured values of $f$ may be available at partition points.
  3. C. Riemann sums cannot use formulas.
  4. D. Tables remove the need to multiply by $\Delta x$.