TOPIC 8.4 · STUDY
Fluids and Conservation Laws
Steady incompressible flow keeps volume flow rate fixed, so fluid speeds up in a narrower section. Bernoulli is energy conservation along a streamline for an ideal fluid; on a horizontal pipe, higher speed means lower pressure.
8.4.A
Continuity and Bernoulli
For steady flow of an incompressible fluid, the volume flow rate is constant along the pipe: $A_1 v_1=A_2 v_2$. Where the cross section is smaller, the speed is larger. The mass flow rate $\rho A v$ is likewise constant; with constant density that is the same statement as continuity for volume.
Continuity: $A_1 v_1=A_2 v_2$. The narrower section has larger flow speed.
Example: $A_1=4.0\times 10^{-4}\,\mathrm{m^2}$, $v_1=2.0\,\mathrm{m/s}$, and $A_2=1.0\times 10^{-4}\,\mathrm{m^2}$. Then $v_2=(A_1/A_2)v_1=4.0\times 2.0=8.0\,\mathrm{m/s}$. The volume flow rate is $A_1 v_1=8.0\times 10^{-4}\,\mathrm{m^3/s}$, the same as $A_2 v_2$.
| Quantity | Wide section | Narrow section |
|---|---|---|
| Area | $4.0\times 10^{-4}\,\mathrm{m^2}$ | $1.0\times 10^{-4}\,\mathrm{m^2}$ |
| Speed | $2.0\,\mathrm{m/s}$ | $8.0\,\mathrm{m/s}$ |
| Volume flow rate | $8.0\times 10^{-4}\,\mathrm{m^3/s}$ | $8.0\times 10^{-4}\,\mathrm{m^3/s}$ |
Bernoulli's equation is energy conservation for an ideal fluid (incompressible, no viscosity, steady flow) along a streamline: $P+\rho g h+\tfrac12\rho v^2$ has the same value at two points on that streamline. The three terms are pressure, gravitational potential energy density, and kinetic energy density.
In a horizontal pipe, $h$ is the same at both sections, so higher speed means lower pressure. With $\rho=1000\,\mathrm{kg/m^3}$, $v_1=2.0\,\mathrm{m/s}$, and $v_2=8.0\,\mathrm{m/s}$: $\tfrac12\rho(v_2^2-v_1^2)=500(64-4)=30000\,\mathrm{Pa}$. The wide, slow section is at higher pressure by $30\,\mathrm{kPa}$: $P_1=P_2+30\,\mathrm{kPa}$.
A large open tank with a small hole a depth $h$ below the free surface is a standard Bernoulli application. The top surface is nearly at rest ($v\approx 0$), and both the top and the hole are at atmospheric pressure, so those $P$ terms cancel. Bernoulli then gives $v=\sqrt{2gh}$ at the hole. For $h=0.80\,\mathrm{m}$ and $g=10\,\mathrm{m/s^2}$, $v=\sqrt{16}=4.0\,\mathrm{m/s}$.
Real fluids have viscosity and can be turbulent, so mechanical energy is not perfectly conserved along a streamline. Bernoulli describes the ideal case with no viscous losses.
Key points
- Incompressible steady flow: $A_1 v_1=A_2 v_2$; speed is larger where the pipe is narrower.
- Mass flow rate $\rho A v$ is also constant; constant $\rho$ makes that the same as volume continuity.
- Example: $A_1=4.0\times 10^{-4}\,\mathrm{m^2}$, $v_1=2.0\,\mathrm{m/s}$, $A_2=1.0\times 10^{-4}\,\mathrm{m^2}$ gives $v_2=8.0\,\mathrm{m/s}$ and flow rate $8.0\times 10^{-4}\,\mathrm{m^3/s}$.
- Bernoulli (ideal fluid along a streamline): $P+\rho g h+\tfrac12\rho v^2$ is constant.
- Horizontal pipe: higher $v$ means lower $P$. For $\rho=1000\,\mathrm{kg/m^3}$, $v_1=2.0\,\mathrm{m/s}$, $v_2=8.0\,\mathrm{m/s}$, $P_1=P_2+30\,\mathrm{kPa}$.
- Open tank, small hole at depth $h$: $v=\sqrt{2gh}$. With $h=0.80\,\mathrm{m}$ and $g=10\,\mathrm{m/s^2}$, $v=4.0\,\mathrm{m/s}$.
- Viscosity and turbulence mean real flows lose mechanical energy; Bernoulli is the ideal limit.
In a narrowing horizontal pipe the fluid speeds up and its pressure drops.