TOPIC 8.2 · STUDY
Pressure
Pressure is force per unit area. In a fluid at rest, absolute pressure increases with depth as P = P_surface + rho g h, and gauge pressure is the excess above atmosphere. Pascal's principle says a pressure change in an enclosed fluid is transmitted throughout.
8.2.A
Pressure
Pressure is force per unit area: $P=F/A$, where $F$ is the force perpendicular to the surface of area $A$. Pressure is a scalar, not a vector. The SI unit is the pascal: $1\,\mathrm{Pa}=1\,\mathrm{N/m^2}$.
The same force on a smaller area produces a larger pressure. A force of $40\,\mathrm{N}$ spread evenly over $0.020\,\mathrm{m^2}$ gives $P=40/0.020=2000\,\mathrm{Pa}$. The same $40\,\mathrm{N}$ on $0.0040\,\mathrm{m^2}$ gives $P=40/0.0040=10000\,\mathrm{Pa}$.
| Force $F$ | Area $A$ | Pressure $P=F/A$ |
|---|---|---|
| $40\,\mathrm{N}$ | $0.020\,\mathrm{m^2}$ | $2000\,\mathrm{Pa}$ |
| $40\,\mathrm{N}$ | $0.0040\,\mathrm{m^2}$ | $10000\,\mathrm{Pa}$ |
In a fluid at rest, the pressure at a point acts equally in all directions. Any surface you place there feels a force perpendicular to that surface, with magnitude set by the local pressure times the area.
Absolute pressure increases with depth in a fluid of density $\rho$: $P=P_{\mathrm{surface}}+\rho g h$, where $h$ is the depth below the surface and $g=10\,\mathrm{m/s^2}$. If the surface is open to the air, the gauge pressure (the amount above atmospheric pressure) is $P_{\mathrm{gauge}}=\rho g h$. The graph below is that gauge pressure for water, plotted in kilopascals versus depth in meters.
Gauge pressure for water ($\rho=1000\,\mathrm{kg/m^3}$, $g=10\,\mathrm{m/s^2}$): $P_{\mathrm{gauge}}=10h$ in kPa when $h$ is in meters. At $h=2.0\,\mathrm{m}$, $P_{\mathrm{gauge}}=20\,\mathrm{kPa}$.
For water, $\rho=1000\,\mathrm{kg/m^3}$ and $g=10\,\mathrm{m/s^2}$, so $\rho g=10000\,\mathrm{Pa/m}=10\,\mathrm{kPa/m}$. At depth $h=2.0\,\mathrm{m}$, $P_{\mathrm{gauge}}=\rho g h=20000\,\mathrm{Pa}=20\,\mathrm{kPa}$. At $h=4.0\,\mathrm{m}$, the gauge pressure is $40\,\mathrm{kPa}$. Doubling the depth doubles the gauge pressure. The atmosphere itself is about $1.0\times 10^{5}\,\mathrm{Pa}$, so the absolute pressure at $2.0\,\mathrm{m}$ in open water is about $1.2\times 10^{5}\,\mathrm{Pa}$.
At the same depth, pressure does not depend on the container's shape or on the total volume of liquid. Only the density, $g$, and the depth $h$ below the free surface enter $P_{\mathrm{gauge}}=\rho g h$.
Pascal's principle: a pressure change applied to an enclosed fluid is transmitted throughout the fluid. For two pistons connected by fluid, $F_1/A_1=F_2/A_2$. If $A_2=20A_1$ and you push the small piston with $30\,\mathrm{N}$, the large piston can support $F_2=30\times 20=600\,\mathrm{N}$. The large piston moves a shorter distance so that the fluid volume displaced stays the same.
Key points
- Pressure is $P=F/A$ with $F$ perpendicular to area $A$; pressure is a scalar, and $1\,\mathrm{Pa}=1\,\mathrm{N/m^2}$.
- Same force on smaller area means larger pressure: $40\,\mathrm{N}$ on $0.020\,\mathrm{m^2}$ is $2000\,\mathrm{Pa}$; on $0.0040\,\mathrm{m^2}$ it is $10000\,\mathrm{Pa}$.
- In a fluid at rest, pressure at a point acts equally in all directions and perpendicular to any surface there.
- Absolute pressure: $P=P_{\mathrm{surface}}+\rho g h$; open surface gauge pressure: $P_{\mathrm{gauge}}=\rho g h$.
- Water with $g=10\,\mathrm{m/s^2}$: at $h=2.0\,\mathrm{m}$, $P_{\mathrm{gauge}}=20\,\mathrm{kPa}$; at $4.0\,\mathrm{m}$ it is $40\,\mathrm{kPa}$.
- Absolute pressure at $2.0\,\mathrm{m}$ in open water is about $1.2\times 10^{5}\,\mathrm{Pa}$ when atmosphere is $1.0\times 10^{5}\,\mathrm{Pa}$.
- At fixed depth, pressure does not depend on container shape or liquid volume.
- Pascal: $F_1/A_1=F_2/A_2$; if $A_2=20A_1$ and $F_1=30\,\mathrm{N}$, then $F_2=600\,\mathrm{N}$.
Gauge pressure is the extra above the atmosphere; absolute pressure adds atmospheric pressure: $P_{\mathrm{abs}}=P_{\mathrm{atm}}+P_{\mathrm{gauge}}$.