TOPIC 8.10 · STUDY

Volume with Disc Method: Revolving Around Other Axes

Revolving around a line that is not a coordinate axis still uses pi R squared. The radius is the distance from the curve to that line.

CHA-5.C

Volume with Disc Method: Revolving Around Other Axes

A disc is still a circle perpendicular to the axis, and its area is still $\pi R^{2}$. If the axis is the horizontal line $y=k$ rather than the $x$-axis, the radius at a given $x$ is the distance $|y_{\mathrm{curve}}-k|$. If the axis is a vertical line $x=k$, the radius is the horizontal distance from the boundary to that line, and the slices perpendicular to the axis lead to an integral with respect to $y$. Square the distance, multiply by $\pi$, and integrate along the axis.

Example. Revolve the region bounded by $y=x$, the line $y=-1$, $x=0$, and $x=2$ around $y=-1$. In inequalities, $-1\le y\le x$ for $0\le x\le 2$. The region reaches the axis, so a slice perpendicular to the $x$-axis is a disc with no hole. The radius is the distance from the line down to the axis: $R(x)=x-(-1)=x+1$. The volume is $V=\int_{0}^{2}\pi(x+1)^{2}\,dx=\pi\int_{0}^{2}(x^{2}+2x+1)\,dx=\pi\left[\frac{x^{3}}{3}+x^{2}+x\right]_{0}^{2}$. At $x=2$ the antiderivative equals $\frac{8}{3}+4+2=\frac{8}{3}+6=\frac{26}{3}$. The volume is $\frac{26\pi}{3}$.

The region under $y=x$ and above the $x$-axis, revolved around the $x$-axis, had volume $\frac{8\pi}{3}$. Here the axis is one unit lower and the region extends down to that axis, so each radius is $x+1$ rather than $x$. The discs are larger, and $\frac{26\pi}{3}$ is greater than $\frac{8\pi}{3}$. At the sample $x=1$, the curve is at $y=1$ and the distance down to $y=-1$ is $2$, which equals $1+1$.

The square has to be expanded fully. $(x+1)^{2}=x^{2}+2x+1$, not $x^{2}+1$. The middle term $2x$ integrates to $x^{2}$, and that term equals $4$ at the upper limit $x=2$. Dropping the middle term would remove $4\pi$ from the volume.

The line y = x and the axis y = -1, with a radius segment from the axis up to the line.

The line $y=x$ on $[0,2]$ and the axis $y=-1$. The vertical segment at $x=1$ runs from $y=-1$ up to $y=1$, so the disc radius there is $2$, which is $x+1$. The volume is $\frac{26\pi}{3}$.

A disc centered on the axis y = -1, with radius up to the line y = x.

One disc centered on the axis $y=-1$. The radius reaches from that axis up to the line $y=x$ and equals $x+1$. Integrating $\pi(x+1)^{2}$ from $0$ to $2$ gives $\frac{26\pi}{3}$.

Key points

  • The radius is the distance from the curve to the axis of rotation.
  • Around $y=-1$, the radius of $y=x$ is $x+1$, not $x$.
  • $(x+1)^{2}$ expands to $x^{2}+2x+1$.
  • The antiderivative at $x=2$ is $\frac{8}{3}+4+2=\frac{26}{3}$.
  • The volume is $\frac{26\pi}{3}$, larger than the $\frac{8\pi}{3}$ volume around the $x$-axis.

A common mistake is to keep the radius equal to $x$, as if the axis were still the $x$-axis. That integral is $\frac{8\pi}{3}$. The axis is $y=-1$, so each radius is $x+1$ and the volume is $\frac{26\pi}{3}$. Revolving only the region above the $x$-axis leaves a gap of height $1$ down to $y=-1$. That solid is a washer with outer radius $x+1$ and inner radius $1$, and its volume is $\pi\int_{0}^{2}(x^{2}+2x)\,dx=\frac{20\pi}{3}$.

Practice this topic