TOPIC 6.1 · STUDY
Exploring Accumulations of Change
When a rate is graphed against time, the region between the graph and the time axis measures how much the underlying quantity changes. For v(t)=2t from t=0 to t=4, that region is a triangle of area 16, so a velocity in meters per second produces a displacement of 16 meters.
CHA-4.A
Accumulated change as area
A rate tells you how fast a quantity is changing, not how much of it you have. If the rate is drawn against time, the accumulated change is the area between that graph and the time axis. Multiply a speed in meters per second by a time in seconds and the product is meters. The same unit cancellation is what the area is doing: height times width has the units of the accumulated quantity.
Take a car whose velocity, in meters per second, is the straight line $v(t)=2t$. At $t=0$ the car is at rest. At $t=4$ the velocity is $2\cdot 4=8$ m/s. From $t=0$ to $t=4$ the region under the line is a triangle with base $4$ seconds and height $8$ m/s. The area is $\frac{1}{2}\cdot 4\cdot 8=16$. The car's displacement over those four seconds is $16$ m, not $16$ m/s.
The same triangle with a moving right edge $t$ has base $t$ and height $2t$, so its area is $\frac{1}{2}\cdot t\cdot 2t=t^2$. That is a geometry formula, read off the graph: the accumulated displacement from time $0$ to time $t$ is $t^2$ meters. At the sample times $1$, $2$, $3$, and $4$ the areas are $1$, $4$, $9$, and $16$.
A piece in the middle is a trapezoid, because the line does not start at height zero there. From $t=1$ to $t=3$ the endpoint velocities are $v(1)=2$ and $v(3)=6$. On a straight graph the accumulated change is the average of those endpoint rates times the elapsed time: $\frac{2+6}{2}\cdot 2=8$ meters. The triangle areas check the same number. Area from $0$ to $3$ is $9$, area from $0$ to $1$ is $1$, and $9-1=8$.
On this graph the velocity never goes negative, so the car does not reverse direction. The $16$ m of area is both the displacement and the distance traveled. A later topic will let the rate change sign; area below the axis then counts against the net change. Here every bit of area is above the axis, and the units stay meters because seconds in the width cancel the per-second in the height.
The line is $v(t)=2t$. With the time axis from $0$ to $4$ and the vertical side at $t=4$, it bounds a triangle of base $4$ s and height $8$ m/s. The area $\frac{1}{2}\cdot 4\cdot 8=16$ is a displacement of $16$ m.
| Time t (s) | Velocity 2t (m/s) | Area from 0 to t (m) |
|---|---|---|
| 0 | 0 | 0 |
| 1 | 2 | 1 |
| 2 | 4 | 4 |
| 3 | 6 | 9 |
| 4 | 8 | 16 |
Key points
- Area under a rate graph is accumulated change. Velocity in m/s times time in s gives displacement in m.
- For $v(t)=2t$ from $0$ to $4$, the region is a triangle of area $\frac{1}{2}\cdot 4\cdot 8=16$ m.
- Up to a general time $t$, the triangle area is $\frac{1}{2}\cdot t\cdot 2t=t^2$ meters.
- From $t=1$ to $t=3$, the average of the endpoint velocities $2$ and $6$, times $2$ seconds, is $8$ m. The same result is $9-1$.
- While velocity stays nonnegative, distance traveled and displacement are the same number.
Common mistake: treating the region as a rectangle and computing $4\cdot 8=32$. The graph meets the time axis at the origin, so the region is a triangle and the area is half of $32$, which is $16$. Keeping the velocity unit is a second slip: the answer is $16$ m, not $16$ m/s.