TOPIC 4.3 · STUDY
Rates of Change in Applied Contexts Other Than Motion
A derivative is still an instantaneous rate when the quantity is not the position of a particle. Depth in meters and time in hours give a rate in meters per hour. A given dr/dt tells how fast a radius is changing.
CHA-3.C
Rates of Change in Applied Contexts Other Than Motion
Many rates have nothing to do with a particle on a line. The quantity might be the depth of water, the radius of a ripple, a cost, or a population. Differentiate the function you were given, then say what the number means at a stated instant, with units.
The units are still output units per input unit. If depth $D$ is in meters and $t$ is in hours, then $D'(t)$ is in meters per hour. A positive value means the depth is increasing. A negative value means the depth is decreasing. A zero value means the depth is not changing at that instant.
A reservoir model gives the water depth by $D(t)=3+0.4t-0.05t^{2}$ meters, where $t$ is hours after midnight. Then $D'(t)=0.4-0.1t$ meters per hour. At $t=2$, $D'(2)=0.2$, so the water is getting deeper at about $0.2$ meters per hour. The depth itself is $D(2)=3.6$ meters. At $t=4$, $D'(4)=0$, so the depth is not changing. At $t=6$, $D'(6)=-0.2$, so the depth is falling at about $0.2$ meters per hour. The depth then is also $D(6)=3.6$ meters: the same depth can go with opposite rates.
| Instant | Depth | Rate | Reading |
|---|---|---|---|
| $t=2$ h | $3.6$ m | $0.2$ m/h | Depth is increasing |
| $t=4$ h | $3.8$ m | $0$ m/h | Depth is not changing |
| $t=6$ h | $3.6$ m | $-0.2$ m/h | Depth is decreasing |
A circular ripple is another rate that is not particle motion. Let $r$ be the radius in meters. Suppose that at the instant when $r=2$ meters, $\dfrac{dr}{dt}=0.4$ meters per second. That statement is about the radius only: the radius is increasing at $0.4$ meters per second. It does not say that the radius is $0.4$ meters, and it does not say how fast the area of the circle is changing.
The arrow is the radius $r$ of a circular ripple. When $r=2$ meters and $\dfrac{dr}{dt}=0.4$ meters per second, the radius is growing at $0.4$ meters per second at that instant.
The area of the ripple is a second quantity, tied to the radius by the geometry of a circle. Finding the area's rate would start from that link and differentiate it. That step is related rates, which is the work of the next two topics. Here, keep the given derivative attached to the quantity it actually differentiates.
Key points
- Applied rates use the same derivative idea as motion, with the units of the stated quantity.
- For $D(t)=3+0.4t-0.05t^{2}$ meters, $D'(t)=0.4-0.1t$ meters per hour.
- At $t=2$ h the depth is increasing at $0.2$ m/h. At $t=6$ h it is decreasing at $0.2$ m/h. At $t=4$ h the rate is $0$.
- $\dfrac{dr}{dt}=0.4$ meters per second means the radius is increasing at that rate.
- The value of the function is the amount or the length. The derivative is how fast that measurement is changing.
- A given radius rate does not by itself answer how fast the area is changing.
A common mistake is to treat $\dfrac{dr}{dt}=0.4$ as a radius of $0.4$ meters, or as an area growing at $0.4$ square meters per second. The $0.4$ is a rate in meters per second. In this reading the radius at that instant is $2$ meters.